DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 6801–6825 of 15,570 recalls.
AUXILIARY WATER PUMP'S ELECTRONIC CIRCUIT BOARD COULD LEAD TO A SHORT CIRCUIT
The auxiliary water pump may short circuit causing a thermal incident.
The Auxiliary Water Pump of the affected vehicles will be replaced.
THE LOAD MAY EXCEED THE VALVE SPRING'S FATIGUE STRENGTH AND THE SPRING MAY FRACTURE
Engine valve springs may fracture.
Replace all engine valve springs.
THE AUXILLIARY WATER PUMP'S ELECTRONIC CIRCUIT BOARD CAN LEAD TO SHORT CIRCUIT
The auxiliary water pump may short circuit causing a thermal incident.
The Auxiliary Water Pump of the affected vehicles will be replaced.
THE LINK ROD RETAINER JOINT TORQUE TIGHTENING PROCESS WAS NOT SUFFICIENTLY SECURED
Steering link rod joint clamp may be insecure.
Check the torque on the link rod and if applicable replace the link rod.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
THE SUNROOF MOTOR HAS AN INCORRECT SOFTWARE VERSION INSTALLED
The sunroof anti-pinch function may not work properly.
The sunroof and roller blind motors will be checked and if necessary replaced with an improved part.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
MANUFACTURING FAULT WITH FUEL VAPOUR SEPARATOR
Manufacturing fault with the fuel vapour separator could result in fire.
Replace fuel vapour separator.
THE BATTERY CHARGE PROGRAM MAY NOT BE CORRECT TO SPECIFICATION
The battery charge program may not be correct to specification.
Updating the Stop Start function management software.
THE CALIBRATION OF THE FRONT PASSENGER SEAT OCCUPANT CLASIFICATION SYSTEM MAY NOT CORRESPOND TO SPECIFICATIONS
Incorrect calibration of the front passenger occupant classification system.
Replace the seat cushion of the front passenger seat.
AN ERROR IN THE CASTING PROCESS MAY AFFECT THE RIGIDITY OF THE SHOCK ABSORBER FORK
A casting process error may affect the rigidity of the front shock absorber fork.
Replace the affected shock absorber forks.
FRONT END FLAP AIR DEFLECTOR OUTER SECTION DOES NOT MATCH CURRENT SERIES PRODUCTION SPECIFICATIONS
The front air deflector may become detached.
Affected vehicles will have the deflector replaced.
THE CALIBRATION OF THE FRONT PASSENGER SEAT OCCUPANT CLASIFICATION SYSTEM MAY NOT CORRESPOND TO SPECIFICATIONS
Incorrect calibration of the front passenger occupant classification system.
Replace the seat cushion of the front passenger seat.
POSSIBLE DISCREPANCY IN THE MANUFACTURING PROCESS OF THE CENTRE REAR SEAT HEAD RESTRAINT
The centre rear head restraint may not be to specification.
Check the head restraint and replace if necessary.
AN ERROR IN THE CASTING PROCESS MAY AFFECT THE RIGIDITY OF THE SHOCK ABSORBER FORK
A casting process error may affect the rigidity of the front shock absorber fork.
Replace the affected shock absorber forks.
AN ERROR IN THE CASTING PROCESS MAY AFFECT THE RIGIDITY OF THE SHOCK ABSORBER FORK
A casting process error may affect the rigidity of the front shock absorber fork.
Replace the affected shock absorber forks.
FRONT END FLAP AIR DEFLECTOR OUTER SECTION DOES NOT MATCH CURRENT SERIES PRODUCTION SPECIFICATIONS
The front air deflector may become detached.
Affected vehicles will have the deflector replaced.
THE SHOCK ABSORBER FORK ON THE FRONT AXLE MAY NOT HAVE BEEN PRODUCED WITH CORRECT CASTING TEMPERATURE
A casting process error may affect the rigidity of the front shock absorber fork.
Replace the affected shock absorber forks.
INCORRECT ELECTRICAL WIRING TO THE ACCELERATOR PEDAL POSITION SENSOR
Incorrect electrical wiring to the accelerator pedal position sensor.
Modify the wiring harness.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →