DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 6451–6475 of 15,570 recalls.
POSSIBLE INCORRECT WELDED CONNECTION OF REAR SEAT BENCH
A welded connection of the rear seat bench may not have been correctly performed.
Check the welding of the mounting for right rear head restraint guides and if necessary replace the backrest frame.
HEAD RESTRAINT MOUNTING MAY NOT BE CORRECTLY WELDED TO REAR SEAT OUTER BACKREST FRAME
The mounting for the head restraint may not be correctly welded to the outer backrest frame for the rear seat.
The backrest on the rear seat bench must be checked and if necessary replaced.
LOOSE BOLTS IN FRONT CHASSIS
Bolts in the front chassis module may become loose.
Replace missing bolts and tighten all of the bolts to manufacturers recommended torque setting.
LATCHING CONNECTION ON THE WHEEL HOUSING LINER MAY FAIL
It is possible that the latching connection on the wheel housing liner may fail.
The wheel arch covers on the affected vehicles must be fixed in place.
WATER MAY GET INTO INTERIOR AND RUN ONTO CONTROL UNITS FOR THE REAR LID
Water may get into the vehicle interior and run onto the control units for the rear lid
The motor lead-through for the electric sliding door is to be sealed to the right side panel.
A WRONG MULTIPLE FUSE WAS INSTALLED IN THE ELECTRONICS BOX
An incorrect multiple fuse was installed in the electronics box.
The incorrect multiple fuse in the electronics box has to be replaced
CRACKS IN THE RIGHT SIDE OF THE SEAT FRAME/PAN
There is a possibility that due to a manufacturing error there is a crack on the frame of the left front seat.
Check and replace the seat frame if a crack is found.
CRACKS IN THE RIGHT SIDE OF THE SEAT FRAME/PAN
There is a possibility that due to a manufacturing error there is a crack on the frame of the left front seat.
Check and replace the seat frame if a crack is found.
THE INCORRECT UPPER CONTROL ARM HAS BEEN ASSEMBLED ON THE LEFT SIDE
The incorrect upper control arm has been assembled on the left side.
The correct upper control arm is to be installed
THE HANDBRAKE CABLE STOPPER MAY HAVE BEEN INCORRECTLY MANUFACTURED
The hand brake cable stopper may have been incorrectly formed in production and may fail.
Replace the handbrake cable and bracket with countermeasure parts
POSSIBLE CRACKS IN LEFT FRONT SEATS
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
Check and replace the seat frame if a crack is found
A WELDING STUD ON THE MAIN FLOOR MAY BE INCORRECTLY WELDED
A welding stud on the main floor may not have been welded correctly
The vehicles will be recalled and the affecting welding stud sealed
RUPTURED FLEXIBLE FRONT BRAKE HOSES MAY OCCUR DURING SUSPENSION AND STEERING ARTICULATIONS
Ruptured flexible front brake hoses may occur from cyclic fatigue.
Replace the front brake hoses with a redesigned component.
ROOF LID FRONT LOCK DOWN STUDS MAY DE-LAMINATE FROM THE UNDERSIDE
Possible involuntary elevation of the grp roof.
Removal of the 2 existing lockdown studs laminated to the underside of the roof and replaced with tie-down studs.
SIDE STEP SHADE RIVETS MAY CORRODE AND FRACTURE
Corrosion of fixing rivets can lead to the side step shade becoming insecure
Change the 12 aluminium rivets to M8 bolts and nuts
IT IS POSSIBLE THAT THE LATCHING CONNECTION ON THE WHEEL HOUSING LINER MAY FAIL.
It is possible that the latching connection on the wheel housing liner may fail.
The wheel arch covers on the affected vehicles must be fixed in place with an additional bolt.
POSSIBLE CRACK ON THE FRAME OF THE LEFT FRONT SEAT
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
Check and replace the seat frame if a crack is found.
FUEL TANK MAY NOT MEET REQUIRED MATERIAL WALL THICKNESS
A fuel tank that may not meet required material wall thickness specification
Check and replace the fuel tank if necessary
POSSIBLE FUEL LEAK FROM TANK
Possible Fuel leak from tank
Check the date of manufacture of the fuel tank and change it if necessary
POSSIBLE CRACK ON THE FRAME OF THE LEFT FRONT SEAT
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
Check and replace the seat frame if a crack is found.
A NUMBER OF NO COATING CATALSYER EXHAUST PIPES MANUFACTURED FOR TESTING PURPOSES ONLY WERE MIXED WITH MASS PRODUCTION PARTS
Exhaust Catalyser coating missing
Affected units will be inspected and the exhaust pipe replaced with a new part.
A NUMBER OF NO COATING CATALSYER EXHAUST PIPES MANUFACTURED FOR TESTING PURPOSES ONLY WERE MIXED WITH MASS PRODUCTION PARTS
Exhaust Catalyser coating missing
Affected units will be inspected and the exhaust pipe replaced with a new part.
REAR SPOILER TO BOOT LID MAY NOT BE ATTACHED SECURELY
Vehicles may not have had the rear spoiler properly attached
The screw connection of the rear spoiler will be inspected and if necessary screws installed.
INTERNAL MALFUNCTION OF THE CONTROL UNIT
Internal malfunction of the air bag control unit
Replacement of the air bag control unit
INTERNAL MALFUNCTION OF THE CONTROL UNIT
Internal malfunction of the air bag control unit
Replacement of the air bag control unit
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →