DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 6151–6175 of 15,570 recalls.
BOLT FAILURE IN SPACER
Possible bolt failure in the Spacer.
Remove spacer and return for full refund.
THE BRAKE PIPE FIXINGS MAY NOT CONFORM TO SPECIFICATION
The brake pipe fixings may not conform to specification
Checking and repairing these fixings and replacing any damaged pipes as necessary
THE BONDING BETWEEN THE CARBON FIBRE DRIVESHAFT AND THE ENGINE TRANSMISSION FLANGE MAY NOT MEET SPECIFICATIONS
The bonding between the carbon-fibre driveshaft and the engine-/transmission flange might not meet the specification.
Replace the carbon-fibre driveshaft on the affected vehicles.
THE REFRIGERANT USED IN THE AIR CONDITION SYSTEM DOES NOT MEET LEGAL REQUIREMENTS
The refrigerant used in the air conditioning system does not meet legal requirements.
Adapt the air conditioning system for usage of the new refrigerant.
THE REFRIGERANT USED IN THE AIR CONDITION SYSTEM DOES NOT MEET LEGAL REQUIREMENTS
The refrigerant used in the air conditioning system does not meet legal requirements.
Adapt the air conditioning system for usage of the new refrigerant.
THE REFRIGERANT USED IN THE AIR CONDITION SYSTEM DOES NOT MEET LEGAL REQUIREMENTS
The refrigerant used in the air conditioning system does not meet legal requirements.
Adapt the air conditioning system for usage of the new refrigerant.
THE ENGINE COOLANT PUMP ELECTRIC LINE MAY CONTACT AND CHAFE THE ENGINE FAN
The electric line for the power supply of the engine coolant pump might chafe on the engine fan.
Check and repair damage if required. The routing of the electric line will be modified in order to prevent potential contact with the engine fan.
THE TIE ROD MAY NOT BE CORRECTLY MOUNTED TO THE RIGHT FRONT AXLE STUB
The mechanical connection between tie rod and right front axle stub might not be ensured.
Replace the tie rod of the right front axle on the affected vehicles.
THE GEAR POSITION SWITCH MAY PROVIDE AN INACCURATE SIGNAL
Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear
As an interim action inspect and clean the gear position switch.
SEAT BELT ANCHORAGE BOLT PARTIALLY ENGAGED
Seat belt anchors and seat bolts may not be secured as per specification
Check tighten and torque all identified bolts to specification
THE REFRIGERANT USED IN THE AIR CONDITIONING SYSTEM MAY NOT MEET LEGAL REQUIREMENTS
The refrigerant used in the air conditioning system does not meet legal requirements
The air conditioning system will be adapted for the usage of the new refrigerant.
A CONDENSER MAY FAIL IN THE AIRBAG CONTROL UNIT
A condenser in the airbag control unit may fail.
The software of the airbag control unit must be updated.
THE GEAR POSITION SWITCH MAY PROVIDE AN INACCURATE SIGNAL
Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear
As an interim action inspect and clean the gear position switch.
THE REFRIGERANT USED IN THE AIR CONDITIONING SYSTEM MAY NOT MEET LEGAL REQUIREMENTS
The refrigerant used in the air conditioning system does not meet legal requirements
The air conditioning system will be adapted for the usage of the new refrigerant.
THE GEAR POSITION SWITCH MAY PROVIDE AN INACCURATE SIGNAL
Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear
As an interim action inspect and clean the gear position switch.
A CONDENSER MAY FAIL IN THE AIRBAG CONTROL UNIT
A condenser in the airbag control unit may fail.
The software of the airbag control unit must be updated.
SEAT BELT ANCHORAGE BOLT PARTIALLY ENGAGED
Seat belt anchors and seat bolts may not be secured as per specification
Check tighten and torque all identified bolts to specification
A CONDENSER MAY FAIL IN THE AIRBAG CONTROL UNIT
A condenser in the airbag control unit may fail.
The software of the airbag control unit must be updated.
THE FOUR LOCKNUTS SECURING THE AIR BAG MIGHT BE MISSING
Certain driver airbag modules might not be bolted onto the base plate.
Check the driver airbag on the affected vehicles and replace it if necessary.
THE FOUR LOCKNUTS SECURING THE AIR BAG MIGHT BE MISSING
Certain driver airbag modules might not be bolted onto the base plate.
Check the driver airbag on the affected vehicles and replace it if necessary.
THE FOUR LOCKNUTS SECURING THE AIR BAG MIGHT BE MISSING
Certain driver airbag modules might not be bolted onto the base plate.
Check the driver airbag on the affected vehicles and replace it if necessary.
THE GEAR POSITION SWITCH MAY PROVIDE AN INACCURATE SIGNAL
Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear
As an interim action inspect and clean the gear position switch.
THE FOUR LOCKNUTS SECURING THE AIR BAG MIGHT BE MISSING
Certain driver airbag modules might not be bolted onto the base plate.
Check the driver airbag on the affected vehicles and replace it if necessary.
INCORRECTLY INSTALLED COVERS COULD PREVENT THE SEAT-MOUNTED SIDE AIRBAG FROM DEPLOYING
Incorrectly installed covers could prevent the seat-mounted side air bag from deploying properly.
Inspect the covers installed on the front seats and replace any incorrectly installed covers
BRAKE BOOSTER PUMP MAY STOP WORKING
An electrical connection within the motor may cause the brake booster pump to stop operating.
Inspect and replace the brake booster pump assembly if necessary.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →