DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 5751–5775 of 15,570 recalls.
THE FIXING OF THE FRONT WING WHEEL ARCH TRIM DOES NOT CONFORM TO SPECIFICATION
The fixing of the front wing wheel arch trim does not conform to specification.
The repair consists of adding an additional fixing screw to the bottom of the front wheel arch trim.
THE UPPER STEERING COLUMN BOLT MAY NOT HAVE BEEN FITTED
The upper steering column bolt may not have been fitted.
Inspect the upper steering column bolt fitment and replace where necessary.
THE FIXED SPEED LIMITER IS INOPERATIVE
Due to the incorrect calibration of the injection computer the fixed speed limiter is inoperative.
Re-program the injection computer.
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
BRAKE PAD MATERIAL MAY DETACH FROM THE BACK PLATE
Brake pad material may detach from the back plate.
Check part number on disc pad replace if the number is the faulty part number.
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
BRAKE PAD MATERIAL MAY DETACH FROM THE BACK PLATE
Brake pad material may detach from the back plate.
Check part number on disc pad replace if the number is the faulty part number
THE OUTER PART OF THE AIR BAFFLE ON THE FRONT PANEL FLAP MAY BE LOOSE
The outer part of the air baffle on the front panel flap could fully or partially detach from the vehicle.
Replace the outer part with one of a different supplier
THE OUTER PART OF THE AIR BAFFLE ON THE FRONT PANEL FLAP MAY BE LOOSE
The outer part of the air baffle on the front panel flap could fully or partially detach from the vehicle.
Replace the outer part with one of a different supplier
THE OUTER PART OF THE AIR BAFFLE ON THE FRONT PANEL FLAP MAY BE LOOSE
The outer part of the air baffle on the front panel flap could fully or partially detach from the vehicle.
Replace the outer part with one of a different supplier
THE BOWDEN CABLE PIN INSIDE THE INTERNAL DOOR HANDLES MAY NOT BE CORRECTLY ENGAGED
The internal door handle mechanism may fail and the door cannot be unlocked from the inside.
Replace the whole internal door handle.
THE BOWDEN CABLE PIN INSIDE THE INTERNAL DOOR HANDLES MAY NOT BE CORRECTLY ENGAGED
The internal door handle mechanism may fail and the door cannot be unlocked from the inside.
Replace the whole internal door handle.
OWNER'S MANUALS FOR THE TRANSPORTER WERE INCLUDED INSTEAD OF FOR THE MULTIVAN
On T6.1 California vehicles owner's manuals for the Transporter were included instead of for the Multivan.
On the affected vehicles the Transporter owner's manual is replaced with the Multivan owner's manual.
TRANSMISSION FLUID PUMP GEAR FAILURE CAN CAUSE A LOSS OF HYDRAULIC FLUID PRESSURE IN THE TRANSMISSION
Transmission fluid pump gear failure
Update the Transmission Control Module (TCM) and Powertrain Control Module (PCM) software
THE FUNCTION OF THE LOCKING MECHANISM ON THE FRONT HEAD RESTRAINTS MAY BE IMPAIRED
The function of the locking mechanism on the front head restraints may be impaired.
The front head restraints must be replaced on the affected vehicles
TRANSMISSION FLUID PUMP GEAR FAILURE CAN CAUSE A LOSS OF HYDRAULIC FLUID PRESSURE IN THE TRANSMISSION
Transmission fluid pump gear failure
Update the Transmission Control Module (TCM) and Powertrain Control Module (PCM) software
THE DRIVER'S AIR BAG FABRIC COULD BE DAMAGED BY THE AIR BAG COVER DURING DEPLOYMENT
This airbag fabric could be damaged by the airbag cover during deployment.
On the affected vehicles the driver�s airbag will be replaced.
THE DRIVER'S AIR BAG FABRIC COULD BE DAMAGED BY THE AIR BAG COVER DURING DEPLOYMENT
This airbag fabric could be damaged by the airbag cover during deployment.
On the affected vehicles the driver�s airbag will be replaced.
THE SEAT SCISSOR AND/OR GUIDE RAIL OF THE DRIVER'S SEAT CAN BREAK
The seat scissor and/or guide rail of the driver's seat can break.
Check the correct installation of the securing strap on the seat scissor of the driver's seat. Fit or re-position if necessary.
THE CABLE LENGTHS FOR THE ELECTRIC CONNECTION OF THE HALL SENSOR INSIDE THE SEATBELT BUCKLE COULD BE TOO SHORT
The cable lengths for the electric connection of the hall sensor integrated inside the seatbelt buckle could be too short.
R; The front seat belt buckles will be checked and replaced if they are found to be faulty.
THE CABLE LENGTHS FOR THE ELECTRIC CONNECTION OF THE HALL SENSOR INSIDE THE SEATBELT BUCKLE COULD BE TOO SHORT
The cable lengths for the electric connection of the hall sensor integrated inside the seatbelt buckle could be too short.
R; The front seat belt buckles will be checked and replaced if they are found to be faulty.
THE CABLE LENGTHS FOR THE ELECTRIC CONNECTION OF THE HALL SENSOR INSIDE THE SEATBELT BUCKLE COULD BE TOO SHORT
The cable lengths for the electric connection of the hall sensor integrated inside the seatbelt buckle could be too short.
R; The front seat belt buckles will be checked and replaced if they are found to be faulty.
THE CABLE LENGTHS FOR THE ELECTRIC CONNECTION OF THE HALL SENSOR INSIDE THE SEATBELT BUCKLE COULD BE TOO SHORT
The cable lengths for the electric connection of the hall sensor integrated inside the seatbelt buckle could be too short.
R; The front seat belt buckles will be checked and replaced if they are found to be faulty.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →