DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 5451–5475 of 15,570 recalls.
FRONT WHEEL HUB ASSEMBLY DOES NOT HAVE THE SURFACE HARDENING IN THE OE PART AND MAY FRACTURE SHEAR OR FAIL COMPLETELY
Front hub assembly may be susceptible to fracture / shear and complete failure.
Stop using the vehicle immediately and remove the part. The distributor will be offering a full refund or delivering a replacement part.
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE VEHICLE BODY MAY NOT BE SEALED IN THE AREA OF THE FRONT WHEEL WELLS
The vehicle body might not be sealed according to specification in the area of the front wheel wells.
Seal the vehicle body in the subject area and check the front foot wells for water intrusion. In case a water intrusion the necessary repair works resulting from this issue would be carried out.
THE ENGINE CONTROL UNIT SOFTWARE NAY NOT MEET SPECIFICATIONS
The engine control unit software might not meet the specifications.
Update the diesel engine control unit software on the affected vehicles.
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE ENGINE CONTROL UNIT SOFTWARE NAY NOT MEET SPECIFICATIONS
The engine control unit software might not meet the specifications.
Update the diesel engine control unit software on the affected vehicles.
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE TRAVELLING SEAT FLOOR BOLT INSTALLATION MAY BE INCORRECT
Potential that the travelling seat floor bolt installation is incorrect
Inspect the installation and rework if necessary
THE FUEL OPERATED HEATER COULD START INADVERTENTLY
The Fuel Operated Heater could start inadvertently
New SYNC system software must be applied.
THE FRONT BRAKE HOSE MAY GET DAMAGED OVER TIME
The front brake hose may get damaged over time. This may lead to a leakage of the brake hose.
Vehicles affected will have the front brake hose replaced.
THE FRONT BRAKE HOSE MAY GET DAMAGED OVER TIME
The front brake hose may get damaged over time. This may lead to a leakage of the brake hose.
Vehicles affected will have the front brake hose replaced.
THE WIRING HARNESS FOR THE HORN MAY NOT BE DURABLE ENOUGH AND COULD BREAK
The wiring harness for the horn may not be durable enough and could break.
Modify the wiring harness
THE BACKREST ADJUSTMENT MECHANISM GAP MAY BE FAULTY ON INDIVIDUAL FRONT SEATS
It is possible that the gap on the adjusting mechanism for the backrest may be faulty on individual front seats.
On the affected vehicles the backrests of the front seats are to be checked and replaced if necessary.
THE ADJUSTMENT MECHANISM OF THE BACKREST FRAME OF THE FRONT SEATS MAY BE INCORRECTLY WELDED
There is the possibility that the adjustment mechanism of the backrest frame of the front seats was incorrectly welded.
On the affected vehicles the backrests of the front seats are to be checked and replaced if necessary.
THE VEHICLES MAY BE AFFECTED BY AN INCORRECT TORQUE APPLIED ON THE REAR AXLE SCREWS
The vehicles may be affected by an incorrect torque applied on the rear axle screws.
Replace and tighten the screws to the correct torque.
THE ANTI-LOCK BRAKE SYSTEM MODULE REMAINS ENERGIZED WHEN VEHICLE IS TURNED OFF
There could be an increased risk of a �key off� engine compartment fire.
Install a relay in the main vehicle fuse box to stop the live positive feed to the ABS module with �key off�.
AN IMPROPER BOND MAY EXIST BETWEEN THE PANORAMIC ROOF AND THE VEHICLE BODY
An improper bond may exist between the panorama roof and the vehicle body.
Remove clean and reinstall the panoramic roof glass on the affected vehicles.
THE SIDE OR REAR WINDOWS MAY BECOME LOOSE
Some side or rear windows may become loose
On the affected vehicles the side or rear windows have to be replaced
THE OIL PAN BOLTS ARE NOT TIGHTENED CORRECTLY
On affected vehicles the oil pan bolt may become loose and in worst case fall out
Carry out a torque check and make the necessary repair
THE HV BATTERY PACK CAN OVERHEAT AND RESULT IN THE VENTING OF HOT GAS
The HV battery pack can overheat and result in the venting of hot gas which can ignite vehicle components or in extreme cases the entire vehicle.
To prevent a vehicle fire the vehicles should not be charged using the external charging cable and the vehicles should only be driven using the default Auto EV mode only.
THE OIL PAN BOLTS ARE NOT TIGHTENED CORRECTLY
On affected vehicles the oil pan bolt may become loose and in worst case fall out
Carry out a torque check and make the necessary repair
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →