DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 4851–4875 of 15,570 recalls.
THE ENGINE CONTROL UNIT CANNOT DETECT AN ERROR OF ATMOSPHERIC PRESSURE SENSOR
The engine control unit cannot detect an error of atmospheric pressure sensor.
Affected units must have the engine control unit reprogrammed
THE ENGINE CONTROL UNIT CANNOT DETECT AN ERROR OF ATMOSPHERIC PRESSURE SENSOR
The engine control unit cannot detect an error of atmospheric pressure sensor.
Affected units must have the engine control unit reprogrammed
LOSS OF TORQUE OF ENGINE HOOD HINGE SCREWS MAY RESULT IN UNLATCHED HOOD
Loss of torque of engine hood hinge screws may result in an unlatched hood.
Replace the hood hinge screws with ones with thread lock.
AFFECTED TYRES MAY DEVELOP BULGES OR SEPARATIONS IN THE SIDEWALL AREA OF THE TYRE
Affected tyres may develop bulges or separations in the sidewall area of the tyre.
Affected tyres will be replaced.
THE EVAPORATIVE EMISSIONS CANISTER MAY BE UNABLE TO ABSORB THE NECESSARY AMOUNT OF FUEL VAPOUR DURING VEHICLE REFUELLING
The Evaporative Emissions Canister may be unable to absorb the necessary amount of fuel vapour during vehicle refuelling.
Replace the Evaporative Emissions Canister.
THE EVAPORATIVE EMISSIONS CANISTER MAY BE UNABLE TO ABSORB THE NECESSARY AMOUNT OF FUEL VAPOUR DURING VEHICLE REFUELLING
The Evaporative Emissions Canister may be unable to absorb the necessary amount of fuel vapour during vehicle refuelling.
Replace the Evaporative Emissions Canister.
THE EVAPORATIVE EMISSIONS CANISTER MAY BE UNABLE TO ABSORB THE NECESSARY AMOUNT OF FUEL VAPOUR DURING VEHICLE REFUELLING
The Evaporative Emissions Canister may be unable to absorb the necessary amount of fuel vapour during vehicle refuelling.
Replace the Evaporative Emissions Canister.
DUE TO INCORRECT TYPE APPROVAL DATA PROCESSING THE MANUFACTURER'S PLATE (VIN PLATE) AND REGISTRATION DOCUMENT MUST BE REPLACED
Due to incorrect type-approval data processing the manufacturer's plate (VIN plate) and registration document must be replaced.
Replace the VIN plate and update the registration document as required.
A HIGH HEAT COULD DEVELOP IN THE MUFFLER CAUSING THE UPPER RIGHT HAND VENT GRILL TO MELT
In some specific riding conditions a high heat could develop in the muffler causing the upper right hand vent grill to melt.
Reprogram the ECM and install a heat reflective foil kit.
THE FRONT SEAT BELT RETRACTOR MAY HAVE BEEN BUILT WITH AN IMPROPERLY FORMED WAVE DISC
The front seat belt retractor may have been built with an improperly formed wave disc.
Replace the front seat belt retractor.
THE PASSENGER SEAT OCCUPANCY DETECTION SYSTEM DOES NOT CURRENTLY MEET THE REQUIRED STANDARD
The passenger seat occupancy detection system does not currently meet the required standard.
The passenger seat occupancy detection sensor mats must be replaced.
THE FRONT SEAT BELT RETRACTOR MAY HAVE BEEN BUILT WITH AN IMPROPERLY FORMED WAVE DISC
The front seat belt retractor may have been built with an improperly formed wave disc.
Replace the front seat belt retractor.
THE REAR BRAKE CALLIPER MAY LEAK BRAKE FLUID INTO THE HOUSING OF THE ELECTRIC PARKING BRAKE
The rear brake calliper may leak brake fluid into the housing of the electric parking brake.
Replace the rear brake callipers and update the ESP software.
THE FRONT SEAT BELT RETRACTOR MAY HAVE BEEN BUILT WITH AN IMPROPERLY FORMED WAVE DISC
The front seat belt retractor may have been built with an improperly formed wave disc.
Replace the front seat belt retractor.
THE FRONT SEAT BELT RETRACTOR MAY HAVE BEEN BUILT WITH AN IMPROPERLY FORMED WAVE DISC
The front seat belt retractor may have been built with an improperly formed wave disc.
Replace the front seat belt retractor.
THE ACCELERATOR PEDAL MAY NOT HAVE BEEN MOUNTED ON THE VEHICLE IN ACCORDANCE WITH THE SPECIFICATION
The accelerator pedal may not have been mounted on the vehicle in accordance with the specification.
Check the correct installation of the accelerator pedal on the affected vehicles and if necessary renew it.
VEHICLES MAY BE FITTED WITH A NON CONFORM ACCESSORY TRAILER HITCH
Vehicles may be fitted with a non-conform accessory trailer hitch.
Check the batch number and if necessary replace the trailer hitch.
THE SEATBELT REMINDER IS NOT DISPLAYED
The seatbelt reminder is not displayed.
Carry out a software update.
A SHORT CIRCUIT IN THE ABS CAN OCCUR WITHOUT WARNING WHEN THE ENGINE IS SWITCHED OFF
A short circuit in the ABS can occur without warning when the engine is switched off.
Installing of a switch off relays to interrupt the power supply to the ABS ECU in vehicle key off condition.
A SHORT CIRCUIT IN THE ABS CAN OCCUR WITHOUT WARNING WHEN THE ENGINE IS SWITCHED OFF
A short circuit in the ABS can occur without warning when the engine is switched off.
Installing of a switch off relays to interrupt the power supply to the ABS ECU in vehicle key off condition.
AFFECTED VEHICLES MAY BE FITTED WITH BRAKE DISCS WHICH ARE NOT TO SPECIFICATION
Affected vehicles may be fitted with brake discs which were not produced according to the specifications
On the affected vehicles the brake discs will be checked and if necessary replaced
AFFECTED VEHICLES MAY BE FITTED WITH BRAKE DISCS WHICH ARE NOT TO SPECIFICATION
Affected vehicles may be fitted with brake discs which were not produced according to the specifications
On the affected vehicles the brake discs will be checked and if necessary replaced
THE BLOWER REGULATOR WIRING COULD BE DAMAGED AND COULD LEAD TO PARTIAL CONTACT OF INDIVIDUAL WIRE STRANDS
The blower-regulator wiring could be damaged and could lead to partial contact of individual wire strands.
The blower regulator wiring harness will be inspected and a new part will be installed additional components will be replaced if necessary.
AFFECTED VEHICLES MAY BE FITTED WITH BRAKE DISCS WHICH ARE NOT TO SPECIFICATION
Affected vehicles may be fitted with brake discs which were not produced according to the specifications
On the affected vehicles the brake discs will be checked and if necessary replaced
AFFECTED VEHICLES MAY BE FITTED WITH BRAKE DISCS WHICH ARE NOT TO SPECIFICATION
Affected vehicles may be fitted with brake discs which were not produced according to the specifications
On the affected vehicles the brake discs will be checked and if necessary replaced
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →