DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 2476–2500 of 15,570 recalls.
A certain production batch of Snell Powerlink X-ring chain with product ID Art. 1727-530DX-124 Art. 1727-525DX-118 and Art. 1727-520DX-114 may have been affected by manufacturing defects.
A certain production batch of Snell Powerlink X-ring chain with product ID Art. 1727-530DX-124 Art. 1727-525DX-118 and Art. 1727-520DX-114 may have been affected by manufacturing defects.
Users are strongly advised to stop using this product immediately particularly if any cracks or deformation in the links appear. Do not use a vehicle on which the mentioned chain has been installed until such time as the chain has been replaced.
ECM/ACM Software Update
Due to an error in our engine software if there is a key-off / key-on signal during operation (i.e. driver turning the key during driving) engine will stop and remain stopped. The original software design is that the engine will not stop if there is a key-off and the vehicle speed is above 10 Km/h. The consequences when the engine stops is there is no steering support.
Update software
Certain brake discs branded as RIDEX / STARK AUTOMOTIVE do not have valid approval and may have a reduction in brake function.
Certain brake discs branded as RIDEX / STARK AUTOMOTIVE�do not have valid approval and may have a reduction in brake function.�
An offer of either replacement brake discs or�the cost of replacement will be made to affected customers.�
Certain brake discs branded as RIDEX / STARK AUTOMOTIVE do not have valid approval and may have a reduction in brake function.
Certain brake discs branded as RIDEX / STARK AUTOMOTIVE�do not have valid approval and may have a reduction in brake function.�
An offer of either replacement brake discs or�the cost of replacement will be made to affected customers.�
On affected vehicles the manufacturer has identified an issue with the hose connection in the area of the outboard right radiator where a coolant leak cannot be ruled out.
On affected vehicles the manufacturer has identified an issue with the hose connection in the area of the outboard right radiator where a coolant leak cannot be ruled out.�
Replace the coolant hose temperature sensor housing and clamp.�
Front driveshaft may come loose from the eDrive motor under certain circumstances.
Front driveshaft may come loose from the eDrive motor under certain circumstances.
Replace the affected driveshaft/s
Turn signals may not activate intermittently due to improper switch contact in the multifunction switch
Turn signals may not activate intermittently due to improper switch contact in the multifunction switch
Software update for the multifunction switch which increases the acceptable range for the control system
In certain collisions passenger backrest could break if it is installed incorrectly and/or used incorrectly
In certain collisions passenger backrest could break if it is installed incorrectly and/or used incorrectly�
Inspect the component to reassemble it according to the procedure and to apply a warning sticker
On affected vehicles due to insufficient sealing under certain circumstances liquid can enter the interior of the high-voltage battery.
On affected vehicles due to insufficient sealing under certain circumstances liquid can enter the interior of the high-voltage battery.�
Check the battery for leaks and replace if necessary.
On certain vehicles the metal bushings may be missing at the rear shock absorber mounting points causing increased friction.
On certain vehicles the metal bushings may be missing at the rear shock absorber mounting points causing increased friction.�
Inspect and where necessary replace the rear shock absorber.�
On affected vehicles the electrical connectors on the W12 Fuel Supply Module located in the fuel tank can overheat and melt the flange material. Melting of the Fuel Supply Module flange material could result in a small fuel leak towards the top of the fuel tank.
On affected vehicles the electrical connectors on the W12 Fuel Supply Module located in the fuel tank can overheat and melt the flange material. Melting of the Fuel Supply Module flange material could result in a small fuel leak towards the top of the fuel tank.
Replacement of the fuel supply module flange.
Side stand spring hooking pin may break and cause the undesired opening of the side stand.
Side stand spring hooking pin may break and cause the undesired opening of the side stand.�
Replacement of side stand plate and spring hook plate.�
TRAILERS ARE NON-COMPLIANT WITH REGULATIONS
Trailers have been supplied without necessary type approval certification in place.
Trailers that do not comply must be presented for IVA and be tested accordingly.
On affected vehicles the screw connection of the partition wall might not meet specifications.
On affected vehicles the screw connection of the partition wall might not meet specifications.
Check and rework the screw connections
Front driver airbag replacement
In vehicles produced in a specific period with airbags from manufacturer Takata in the event of an accident with airbag activation the driver airbag gas generator housing may explode.�
Inspect the driver�s airbag and replace it if necessary.�
Front driver airbag replacement
In vehicles produced in a specific period with airbags from manufacturer Takata in the event of an accident with airbag activation the driver airbag gas generator housing may explode.�
Inspect the driver�s airbag and replace it if necessary.�
Front driver airbag replacement
In vehicles produced in a specific period with airbags from manufacturer Takata in the event of an accident with airbag activation the driver airbag gas generator housing may explode.�
Inspect the driver�s airbag and replace it if necessary.�
Front driver airbag replacement
In vehicles produced in a specific period with airbags from manufacturer Takata in the event of an accident with airbag activation the driver airbag gas generator housing may explode.�
Inspect the driver�s airbag and replace it if necessary.�
On affected vehicles the rear leaf springs may break and need replacing.
On affected vehicles the rear leaf springs may break and need replacing.
Check rear leaf springs for breakage and part numbers and replace if necessary.
Incorrectly configured Restraint Control Module (RCM) which can cause the restraint system not to work as intended. In the event of an incorrect crash sensor being installed throughout the life of the vehicle while in service the current software will not detect it and will not display any warnings in the dash so in the event of an accident the restraints system performance could potentially be degraded therefore increasing the risk of an injury.
Incorrectly configured Restraint Control Module (RCM) which can cause the restraint system not to work as intended. In the event of an incorrect crash sensor being installed throughout the life of the vehicle while in service the current software will not detect it and will not display any warnings in the dash so in the event of an accident the restraints system performance could potentially be degraded therefore increasing the risk of an injury.
Dealers will perform a configuration update in order to restore functionality.
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
Replace O-Ring
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
Replace O-Ring
On affected vehicles the cable lug of the 48V ground connection in the engine compartment might not be fixed correctly.
On affected vehicles the cable lug of the 48V ground connection in the engine compartment might not be fixed correctly.�
Check the bolting of the ground connection on the affected vehicles and repair if necessary
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
Replace O-Ring
On affected motorcycles the rear swing arm has been incorrectly assembled at the factory.
On affected motorcycles the rear swing arm has been incorrectly assembled at the factory.�
Replace the swing arm bolt.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →