DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 2276–2300 of 15,570 recalls.
On affected vehicles there is concern that the structural adhesive applied to the bodyshell has been mis-applied.
On affected vehicles there is concern that the structural adhesive applied to the bodyshell has been mis-applied.
Install two rivets and seal with approved sealant.
On affected vehicles a Gel battery can without warning crack open. The GEL battery can produce an internal spark in the battery potentially igniting the hydrogen gas inside the battery.
On affected vehicles a Gel battery can without warning crack open. The GEL battery can produce an internal spark in the battery potentially igniting the hydrogen gas inside the battery.�
Inspect Replace battery�
On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.
On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.�
Replace the airbag collision sensors.�
On affected vehicles cylinder head cover may not be sufficiently shaped in a specific area hairline cracks or more serious leaks may occur due to vibration or heat.
On affected vehicles cylinder head cover may not be sufficiently shaped in a specific area hairline cracks or more serious leaks may occur due to vibration or heat.
On affected vehicles the cylinder head cover will be checked and if necessary replaced�
Affected vehicles may have an engine that was incorrectly assembled due to improper setting of the high-pressure fuel pump and/or improper setting of the timing belt.
Affected vehicles may have an engine that was incorrectly assembled due to improper setting of the high-pressure fuel pump and/or improper setting of the timing belt.
Check high pressure fuel pump setting and replace engine if not correct. If high pressure fuel pump setting is correct check timing belt setting and replace timing belt if necessary.
On affected vehicles the Steering column mounting bracket may suffer structural failure.
On affected vehicles the Steering column mounting bracket may suffer structural failure.
Inspect steering column mounting bracket for structural integrity and replace dashboard crossmember if required.
On affected vehicles the Steering column mounting bracket may suffer structural failure.
On affected vehicles the Steering column mounting bracket may suffer structural failure.
Inspect steering column mounting bracket for structural integrity and replace dashboard crossmember if required.
On affected vehicles the Steering column mounting bracket may suffer structural failure.
On affected vehicles the Steering column mounting bracket may suffer structural failure.
Inspect steering column mounting bracket for structural integrity and replace dashboard crossmember if required.
On affected vehicles under specific conditions (such as electric driving in wet weather) the required operating force of the brake pedal for a deceleration intended by the driver might be increased.
On affected vehicles under specific conditions (such as electric driving in wet weather) the required operating force of the brake pedal for a deceleration intended by the driver might be increased.�
Update the ESP control unit software
The fuel pump impeller could swell and cause the fuel pump to stop working.
The fuel pump impeller could swell and cause the fuel pump to stop working.�
Inspect and if necessary replace the fuel pump.
FHE/FME vehicles have been delivered with screw joints inside the traction voltage batteries that might not have been tightened according to our assembly process.
FHE/FME vehicles have been delivered with screw joints inside the traction voltage batteries that might not have been tightened according to our assembly process.
Replace the affected batteries in the concerned vehicles.� �
Stake nuts fitted to certain axles may not have been tightened to the correct torque this may result in the wheel becoming loose or possibly detaching.
Stake nuts fitted to certain axles may not have been tightened to the correct torque this may result in the wheel becoming loose or possibly detaching.�
Inspect the stake nuts fitted to the axle and where necessary replace and/or mark the nut once tightened to the correct torque.
Stake nuts fitted to certain axles may not have been tightened to the correct torque this may result in the wheel becoming loose or possibly detaching.
Stake nuts fitted to certain axles may not have been tightened to the correct torque this may result in the wheel becoming loose or possibly detaching.�
Inspect the stake nuts fitted to the axle and where necessary replace and/or mark the nut once tightened to the correct torque.
Rearview mirror lenses may dislodge – decreased visibility
The rear view mirror's lens may dislodge from the housing.
Both rearview mirror assemblies will be replaced with revised units.
Stake nuts fitted to certain axles may not have been tightened to the correct torque this may result in the wheel becoming loose or possibly detaching.
Stake nuts fitted to certain axles may not have been tightened to the correct torque this may result in the wheel becoming loose or possibly detaching.�
Inspect the stake nuts fitted to the axle and where necessary replace and/or mark the nut once tightened to the correct torque.
Rearview mirror lenses may dislodge – decreased visibility
The rear view mirror's lens may dislodge from the housing.
Both rearview mirror assemblies will be replaced with revised units.
On affected vehicles the rear spoiler setting may not meet specifications due to incorrect coding during production making it too high. The high-mounted brake light may become less visible while driving and the aerodynamics of the vehicle may change.
On affected vehicles the rear spoiler setting may not meet specifications due to incorrect coding during production making it too high.� The high-mounted brake light may become less visible while driving and the aerodynamics of the vehicle may change.
Re-code the rear vehicle electronics control unit on affected vehicles.�
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles the transmission mechatronic module will be replaced
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles the transmission mechatronic module will be replaced
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles the transmission mechatronic module will be replaced
On affected vehicles the three screws connecting the electric motor to the steering gear are potentially not fastened correctly.
On affected vehicles the three screws connecting the electric motor to the steering gear are potentially not fastened correctly.
On affected vehicles the steering gear will be replaced
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles the transmission mechatronic module will be replaced
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module
On affected vehicles the transmission mechatronic module will be replaced
On affected vehicles the three screws connecting the electric motor to the steering gear are potentially not fastened correctly.
On affected vehicles the three screws connecting the electric motor to the steering gear are potentially not fastened correctly.
On affected vehicles the steering gear will be replaced
On affected vehicles the rear spoiler setting may not meet specifications due to incorrect coding during production making it too high. The high-mounted brake light may become less visible while driving and the aerodynamics of the vehicle may change.
On affected vehicles the rear spoiler setting may not meet specifications due to incorrect coding during production making it too high.� The high-mounted brake light may become less visible while driving and the aerodynamics of the vehicle may change.
Re-code the rear vehicle electronics control unit on affected vehicles.�
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →