DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 11276–11300 of 15,570 recalls.
ENGINE MAY FAIL
Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.
Recall all affected vehicles and replace the engine.
PARKING BRAKE MAY FAIL
It has been identified that due to the Non-Conformity of the handbrake adjustment system in the handbrake mechanism it is possible that there can be a reduction in the efficiency of the parking brake.
Recall all affected vehicles for the replacement of the handbrake lever mechanism.
ENGINE MAY FAIL
Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.
Recall all affected vehicles and replace the engine.
ENGINE MAY FAIL
There may be a fault in the machining of the crankshaft that could lead to a lubrication problem which overtime could lead to the engine seizing.
The recalled vehicles will have the engine replaced.
ENGINE MAY FAIL
There may be a fault in the machining of the crankshaft that could lead to a lubrication problem which overtime could lead to the engine seizing.
The recalled vehicles will have the engine replaced.
FUEL LEAKAGE
Electrolyte from the battery could leak onto the plastic fuel pump which can result in a crack forming. The load from the connecting hose which occurs during normal use any crack could expand and lead to a fuel leak.
Recall he machines that are likely to be affect to fit a new redesigned battery box and where necessary replace the fuel pump.
KINGPIN MAY FAIL
It has been identified that a number of kingpins manufactured by SAF- Holland are under certain conditions likely to fail. Should this occur trailer detachment would result.
Recalled vehicles will have the subject kingpins replaced with a quality assured item.
ENGINE MAY STALL
The engine ECU may have the incorrect settings installed which could cause the engine to stall and cause the rider to loose control of the machine.
Recall all affected machines and change the engine ECU.
REAR AXLE MAY FAIL
Because of a manufacturing error the nearside rear stub axle could start to develop cracks at the inner radius which could eventually lead to failure of the stub axle and difficulty in maintaining directional control.
Recall the vehicles that are likely to be affected to replace the rear axle.
REAR AXLE MAY FAIL
There is a risk that the nearside rear axle spindle may crack which in the most serious cases will lead to the spindle breaking which dependent on loading could make directional control difficult to maintain.
Recall the vehicles that are likely to be affected to change the rear axle.
FRONT SEAT MAY FAIL
It has been found that some of the front seat mounting brackets have not been correctly fitted to the seats. The front seat mountings could fail if the fitting brackets have been incorrectly fitted. Vehicle control could be affected.
Recall the vehicles that are likely to be affected to check and where necessary fit new seat assemblies.
POWER ASSISTED STEERING MAY LEAK OIL.
It is possible that a power assisted steering fluid leak could occur on the connection from the connection on the fluid line to pump. Drivers should be made aware of the concern by noise being emitted whilst the vehicle is being driven.
Recall all affected to check the connection and if required replace the sealing ring.
POWER ASSISTED STEERING MAY LEAK OIL.
It is possible that a power assisted steering fluid leak could occur on the connection from the connection on the fluid line to pump. Drivers should be made aware of the concern by noise being emitted whilst the vehicle is being driven.
Recall all affected to check the connection and if required replace the sealing ring.
REAR WINDOW MAY DETACH
The rear vent window may have detached itself from both front mounts. It is therefore possible that the rear vent window detaches itself from the body.
Recall the vehicles that are likely to be affected to exchange the rear vent window/both rear vent windows.
REAR WINDOW MAY DETACH
The rear vent window may have detached itself from both front mounts. It is therefore possible that the rear vent window detaches itself from the body.
Recall the vehicles that are likely to be affected to exchange the rear vent window/both rear vent windows.
WHEEL MAY BECOME LOOSE
It has been identified that the standard wheel securing bolts may not have undergone the correct hardening process. This will result in corrosion a noise and/or vibration. If this condition is not rectified there is a possibility that the wheel may become loose and detach.
Recall all affected vehicles and replace the standard wheel bolts.
WHEEL MAY BECOME LOOSE
It has been identified that the standard wheel securing bolts may not have undergone the correct hardening process. This will result in corrosion a noise and/or vibration. If this condition is not rectified there is a possibility that the wheel may become loose and detach.
Recall all affected vehicles and replace the standard wheel bolts.
WHEEL MAY BECOME LOOSE
It has been identified that the standard wheel securing bolts may not have undergone the correct hardening process. This will result in corrosion a noise and/or vibration. If this condition is not rectified there is a possibility that the wheel may become loose and detach.
Recall all affected vehicles and replace the standard wheel bolts.
PARKING BRAKE MAY FAIL
The parking brake may fail to hold the vehicle stationary when applied. If this defect occurs the driver will be alerted by a weak effort when moving the parking brake lever.
The recalled vehicles will be fitted with a quality assured parking brake lever.
AIRBAG MAY NOT DEPLOY AS INTENDED.
It is possible that an electrical short circuit within a connector could result in the illumination of the Airbag System Service Required message and Supplemental Restraint System warning lamp on the dashboard. Should this occur the driver's airbag would not deploy as intended if the vehicle is involved in a collision.
Recall all affected vehicles to check and rework the connector.
AIRBAG MAY NOT DEPLOY AS INTENDED.
It is possible that an electrical short circuit within a connector could result in the illumination of the Airbag System Service Required message and Supplemental Restraint System warning lamp on the dashboard. Should this occur the driver's airbag would not deploy as intended if the vehicle is involved in a collision.
Recall all affected vehicles to check and rework the connector.
WHEEL MAY BECOME LOOSE
It has been identified that the standard wheel securing bolts may not have undergone the correct hardening process. This will result in corrosion a noise and/or vibration. If this condition is not rectified there is a possibility that the wheel may become loose and detach.
Recall all affected vehicles and replace the standard wheel bolts.
AIRBAG MAY NOT DEPLOY AS INTENDED.
It is possible that an electrical short circuit within a connector could result in the illumination of the Airbag System Service Required message and Supplemental Restraint System warning lamp on the dashboard. Should this occur the driver's airbag would not deploy as intended if the vehicle is involved in a collision.
Recall all affected vehicles to check and rework the connector.
AIRBAG MAY NOT DEPLOY AS INTENDED.
It is possible that an electrical short circuit within a connector could result in the illumination of the Airbag System Service Required message and Supplemental Restraint System warning lamp on the dashboard. Should this occur the driver's airbag would not deploy as intended if the vehicle is involved in a collision.
Recall all affected vehicles to check and rework the connector.
AIRBAG MAY NOT DEPLOY AS INTENDED.
It is possible that an electrical short circuit within a connector could result in the illumination of the Airbag System Service Required message and Supplemental Restraint System warning lamp on the dashboard. Should this occur the driver's airbag would not deploy as intended if the vehicle is involved in a collision.
Recall all affected vehicles to check and rework the connector.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →