DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 6501–6525 of 15,570 recalls.
THE FUEL PIPE FROM THE EXTERNAL FUEL PUMP ON THE LEFT HAND SIDE CAN SHOW SIGNS OF DETERIORATION AND SPLITTING
Fuel pipe deteriation
The fuel pipes affected are to be replaced
THE FUEL PIPE FROM THE EXTERNAL FUEL PUMP ON THE LEFT HAND SIDE CAN SHOW SIGNS OF DETERIORATION AND SPLITTING
Fuel pipe deteriation
The fuel pipes affected are to be replaced
REAR SPRING BOLT COULD FRACTURE AND MIGRATE
The rear suspension spring locating bolt could fail and migrate.
Fitment of an anti-migration bracket.
POTENTIAL RISK OF FAILURE TO THE SECONDARY PARKING BRAKE
Possible failure of the parking brake due to a non-conformity (crimping) at cable connection ends.
Replace the secondary cables and connectors.
REAR BENCH SEATBELT BUCKLE BOLTS MAY NOT BE CORRECTLY TIGHTENED
Rear bench seatbelt buckle bolts may not be correctly tightened.
Check the buckle bolts are at the correct torque.
REAR SPRING BOLT COULD FRACTURE AND MIGRATE
The rear suspension spring locating bolt could fail and migrate.
Fitment of an anti-migration bracket.
THE MAXIMUM PERMISSIBLE ROOF LOAD OF 150 KG IS NOT DOCUMENTED IN THE OPERATING MANUAL
The maximum permissible roof load is not documented in the operating manual
The vehicle operating manuals are to be exchanged. For all vehicles with canopies installed the corresponding accessory operating manual will also be exchanged
INCORRECT MOUNTING INSTRUCTIONS SUPPLIED FOR RETROFITTING A TRAILER COUPLING
Incorrect specified tightening torque for the mounting screws of a cross member to be installed in conjunction with towbar fitment.
Mounting bolts on the trailer coupling are to be replaced if already fitted. Instructions to be updated on supplied kits.
OVERHEATING OF THE ENGINE CYLINDER HEAD MAY CAUSE THE CYLINDER HEAD TO CRACK
localized overheating of the engine cylinder head may cause the cylinder head to crack.This may cause a pressurized oil leak which in extreme circumstances could result in a fire in the engine compartment.
A coolant level sensor needs to be fitted to provide an audible and visual warning to the customer and in extreme circumstances reduce the engine power.
OVERHEATING OF THE ENGINE CYLINDER HEAD MAY CAUSE THE CYLINDER HEAD TO CRACK
localized overheating of the engine cylinder head may cause the cylinder head to crack.This may cause a pressurized oil leak which in extreme circumstances could result in a fire in the engine compartment.
A coolant level sensor needs to be fitted to provide an audible and visual warning to the customer and in extreme circumstances reduce the engine power.
ELECTRICAL FRAME WIRING HARNESS
Damage may occur at the electrical frame wiring harness along the right longitudinal frame member.
Check the wiring harness and repair as necessary.
INCORRECTLY SHAPED RIVET HOLES FOR THE FIXTURE BETWEEN THE MOVEABLE DRIVEN FACE COMPONENTS
Clutch may not be to specification
Replace the clutch and cover plate
NON-CONFORMITY IN THE AIR BAG CONTROL MODULE SOFTWARE
Non-conformity in the airbag control module software
Update the airbag control module software
OVERHEATING OF THE ENGINE CYLINDER HEAD MAY CAUSE THE CYLINDER HEAD TO CRACK
localized overheating of the engine cylinder head may cause the cylinder head to crack.This may cause a pressurized oil leak which in extreme circumstances could result in a fire in the engine compartment.
A coolant level sensor needs to be fitted to provide an audible and visual warning to the customer and in extreme circumstances reduce the engine power.
ELECTRICAL POWER STEERING WIRE COULD BECOME TRAPPED BETWEEN THE CROSS BEAM AND UNDERFLOOR COVER
The electric power steering harness could become trapped and damaged.
Check and replace the electric power steering harness if necessary.
UNINTENDED ACTIVATION OF THE SIDE AIR BAG CURTAIN AIR BAG AND SEAT PRE TENSIONER MAY OCCUR WHEN REAR DOOR IS SLAMMED SHUT.
Unintended activation of side and curtain air bags and seat belt pre-tensioner.
Software update to Airbag Controle Module.
POTENTIAL INCORRECT TIGHTENING OF FRONT LUGGAGE COMPARTMENT (BONNET) BOLTS
Incorrect tightening of front luggage compartment (bonnet) bolts. Extreme risk front luggage compartment may open when driving.
Check and if required correct the torque of the front luggage compartment bolts.
EXHAUST VALUE SOLENOID WIRING MAY SHORT CIRCUIT
Exhaust value solenoid wiring may short circuit due to contact on the exhaust.
Fit a protective sleeve to the wiring.
REDUCTION IN BRAKING POWER WHERE THE BRAKE PEDAL IS APPLIED SLOWLY AND CONSTANTLY
Potential for a reduction in braking power where the brake pedal is applied slowly and constantly.
Replacement of hydraulic brake and clutch system components.
FRAME BREAKAGE TOWARDS FRONT SECTION OF THE MOTORCYCLE
Possible weak points in the frame that under certain conditions could fail.
Replace affected vehicles.
A CRACK COULD DEVELOP ON THE INSULATION OF THE WIRE HARNESSES OF THE FRONT SEAT SIDE AIRBAG SENSORS
The front seat side airbags could be deactivated and/or the curtain airbags may not operate as intended.
Inspect the front door wire harness and replace if necessary.
WATER MAY ENTER THE HIGH VOLTAGE BATTERY
Water ingress into the high- voltage battery potentially causing a short circuit and risk of fire.
Permanent solution being developed. Owners offered an alternative vehicle until solution availible if required.
OIL PASSAGE HOLES IN THE OIL FILTER HOUSING MAY BE INCORRECTLY MACHINED
There is a possibility that the oil passage holes in the oil filter housing have not been correctly machined.
If the oil passage holes have not been correctly machined the engine assembly will be replaced.
OIL PASSAGE HOLES IN THE OIL FILTER HOUSING MAY BE INCORRECTLY MACHINED
There is a possibility that the oil passage holes in the oil filter housing have not been correctly machined.
If the oil passage holes have not been correctly machined the engine assembly will be replaced.
A POSSIBLE NON- CONFORMITY OF THE AIR BAG AND THE SEAT BELT PRETENSIONERS ELECTRONIC CONTROL UNIT
Non-conformity of the air bag and seatbelt pre-tensioner ECU.
Replacement of the ECU
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →