DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 5251–5275 of 15,570 recalls.
THE ABSORPTION OF MOISTURE INTO THE DRIVER'S AIR BAG PROPELLANT COULD LEAD TO SLOW DEPLOYMENT OR INFLATOR RUPTURE
The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.
Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts.
THE ABSORPTION OF MOISTURE INTO THE DRIVER'S AIR BAG PROPELLANT COULD LEAD TO SLOW DEPLOYMENT OR INFLATOR RUPTURE
The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.
Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts.
THE ABSORPTION OF MOISTURE INTO THE DRIVER'S AIR BAG PROPELLANT COULD LEAD TO SLOW DEPLOYMENT OR INFLATOR RUPTURE
The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.
Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts.
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
WHEN USING ENGINE BRAKE OR THIRD BRAKE IN MOTION BRAKE LIGHTS ARE NOT ACTIVATED
When using the engine brake/intarder or third brake in motion the brake lights are not activated
Vehicle software update to the VECU
WHEN USING ENGINE BRAKE OR THIRD BRAKE IN MOTION BRAKE LIGHTS ARE NOT ACTIVATED
When using the engine brake/intarder or third brake in motion the brake lights are not activated
Vehicle software update to the VECU
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
REMAINING PARTICLES IN THE CELLS OF THE HIGH VOLTAGE BATTERY CAN CAUSE A SHORT CIRCUIT
In very rare cases welding beads were not always completely removed in the cleaning process during battery production.
Test and replace the High Voltage batteries if affected.
PROP SHAFT CENTRE BEARING BOLTS MIGHT BE UNDER TORQUED
Prop shaft centre bearing support brackets are potentially under torqued in production
Check the fixing bolts of affected brackets and tightened to the correct 110Nm torque setting.
VEHICLE SHUTDOWN SEQUENCE MAY INITIATE WITHOUT PROVIDING REASONABLE RIDER INDICATION
Vehicle shutdown sequence may initiate without providing reasonable rider indication.
Updating of the on-board software.
THE ADJUSTABLE SECOND SEAT ROW MAY NOT HAVE BEEN INSTALLED TO SPECIFICATIONS
The second seat row might not be correctly engaged in the seat rail on one side.
Check the installation of the second seat row on the affected vehicles and correct it if necessary
PROP SHAFT CENTRE BEARING BOLTS MIGHT BE UNDER TORQUED
Prop shaft centre bearing support brackets are potentially under torqued in production
Check the fixing bolts of affected brackets and tightened to the correct 110Nm torque setting.
IT MAY NOT BE POSSIBLE TO SWITCH HEADLIGHTS FROM HIGH BEAM TO LOW BEAM OR LOW BEAM TO HIGH BEAM
It may not be possible to switch headlights from high beam to low beam or low beam to high beam.
Replace the Headlamp Units
IT MAY NOT BE POSSIBLE TO SWITCH HEADLIGHTS FROM HIGH BEAM TO LOW BEAM OR LOW BEAM TO HIGH BEAM
It may not be possible to switch headlights from high beam to low beam or low beam to high beam.
Replace the Headlamp Units
THE PLATE WHICH IS INSTALLED BETWEEN THE SPRING CARRIER AND THE PLASTIC ROLLER PISTON CAN DEFORM OR MAY BE MISSING
The plate which is installed between the spring carrier and the plastic roller piston can deform or may be missing
Installation of a 4mm plate and replacement of the mounting bolt.
THE PLATE WHICH IS INSTALLED BETWEEN THE SPRING CARRIER AND THE PLASTIC ROLLER PISTON CAN DEFORM OR MAY BE MISSING
The plate which is installed between the spring carrier and the plastic roller piston can deform or may be missing
Installation of a 4mm plate and replacement of the mounting bolt.
THE PLATE WHICH IS INSTALLED BETWEEN THE SPRING CARRIER AND THE PLASTIC ROLLER PISTON CAN DEFORM OR MAY BE MISSING
The plate which is installed between the spring carrier and the plastic roller piston can deform or may be missing
Installation of a 4mm plate and replacement of the mounting bolt.
THE PLATE WHICH IS INSTALLED BETWEEN THE SPRING CARRIER AND THE PLASTIC ROLLER PISTON CAN DEFORM OR MAY BE MISSING
The plate which is installed between the spring carrier and the plastic roller piston can deform or may be missing
Installation of a 4mm plate and replacement of the mounting bolt.
THE FRONT WHEELS ASSEMBLY MAY NOT HAVE BEEN TIGHTENED CORRECTLY
The front wheels assembly may not have been performed properly during the predelivery preparation.
Check and correct if required the front wheel torque and fitment of a locking clip
THE HIGH VOLTAGE BATTERY SYSTEM MAY HAVE A FAULTY MANAGEMENT SYSTEM (BMS)
The high voltage battery system may have a faulty battery management system (BMS) or in extreme cases may exhibit internal damage to certain cells of the lithium-ion battery
A software upgrade to the BMS inspection of lithium-ion battery data and if required replacement of a faulty battery module or complete battery assembly
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →