DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 4151–4175 of 15,570 recalls.
THE FUEL LINE COULD CHAFE AGAINST THE AIR CONDITIONING LINE
The fuel line could chafe against the air conditioning line due to an insufficient minimum distance.
Replace the existing fuel line with a fuel line reinforced with a protective sleeve on the affected vehicles.
THE SIDE STAND COULD BREAK AT THE WELD
The side stand could break at the weld that joins the side stand tube with the upper forged section.
Replace the side stand
CHANGES TO SPECIFIC ASPECTS OF THE ENGINE CONTROL SYSTEM CALIBRATION ARE REQUIRED
Changes to specific aspects of the engine control system calibration are required.
Depending on vehicle specification and options software updates to multiple control units will be conducted.
THE THIRD (HIGH LEVEL) BRAKE LIGHT MAY NOT FUNCTION
The third (high level) brake light may not function.
Update the software to activate the third brake light function.
CERTAIN SEAT BELT ASSEMBLIES DO NOT COMPLY WITH SAFETY STANDARDS
Certain seat belt assemblies do not comply with safety standards.
Inspect the affected seat belt assemblies and if necessary replace the seat belt.
THE DRIVE SHAFT MAY FAIL DUE TO A NON-CONFORMITY IN THE MATERIAL
The drive shaft joints may fail
Replace the drive shaft or shafts as required
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
DAMAGE OF THE GASKET MAY AFFECT THE FUNCTION OF THE CLUTCH SLAVE CYLINDER
Damage to the seal caused by deviations in assembly may impair the function of the clutch slave cylinder.
Inspect the slave cylinder and check which part version is fitted to the motorcycle. Replace the unit if the affected part version is fitted.
With an active EBS DTC EBS yellow tell-tale is displayed instead of EBS red tell-tale
With an active EBS DTC EBS yellow tell-tale is displayed instead of EBS red tell-tale.
Update MID140 software
THE CURRENT SOFTWARE DOES NOT PROVIDE SUFFICIENT NOx MONITORING
The current software does not provide sufficient NOx monitoring to confirm that the legal requirements on NOx emissions are met.
Update EMS software.
THE CURRENT SOFTWARE DOES NOT PROVIDE SUFFICIENT NOx MONITORING
The current software does not provide sufficient NOx monitoring to confirm that the legal requirements on NOx emissions are met.
Update EMS software.
THE CERTIFICATE OF CONFORMITY PAPER & CUSTOMER INFORMATION FILE CONTAINS THE INCORRECT INFORMATION.
The Certificate of Conformity (COC) paper and Customer Information File (CIF) contains the incorrect information.
Request customer�return the old COC paper and provide with the new corrected COC paper.
THE CERTIFICATE OF CONFORMITY PAPER & CUSTOMER INFORMATION FILE CONTAINS THE INCORRECT INFORMATION.
The Certificate of Conformity (COC) paper and Customer Information File (CIF) contains the incorrect information.
Request customer�return the old COC paper and provide with the new corrected COC paper.
ENGINE MANAGEMENT SOFTWARE COULD CAUSE THE OIL/VACUUM PUMP TO BECOME DAMAGED
Engine management software could cause the oil/vacuum pump to become damaged.
Reflash the engine control unit (ECU).
THE CURRENT SOFTWARE DOES NOT PROVIDE SUFFICIENT NOX MONITORING TO CONFIRM THE LEGAL REQUIREMENTS
The current software does not provide sufficient NOx monitoring to confirm that the legal requirements on NOx emissions are met.
Update EMS software
THE BELT TENSIONER ARM MAY HAVE BEEN MANUFACTURED WITH BORDERLINE TOLERANCE
The belt tensioner arm may have been manufactured with borderline tolerance.
Replace the belt tensioner. Additionally check the v-ribbed belt on the affected vehicles and replace it if necessary.
THE BELT TENSIONER ARM MAY HAVE BEEN MANUFACTURED WITH BORDERLINE TOLERANCE
The belt tensioner arm may have been manufactured with borderline tolerance.
Replace the belt tensioner. Additionally check the v-ribbed belt on the affected vehicles and replace it if necessary.
THE BELT TENSIONER ARM MAY HAVE BEEN MANUFACTURED WITH BORDERLINE TOLERANCE
The belt tensioner arm may have been manufactured with borderline tolerance.
Replace the belt tensioner. Additionally check the v-ribbed belt on the affected vehicles and replace it if necessary.
THE BELT TENSIONER ARM MAY HAVE BEEN MANUFACTURED WITH BORDERLINE TOLERANCE
The belt tensioner arm may have been manufactured with borderline tolerance.
Replace the belt tensioner. Additionally check the v-ribbed belt on the affected vehicles and replace it if necessary.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →