DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 3526–3550 of 15,570 recalls.
A NUMBER OF VEHICLES FITTED WITH ADAPTIVE HEADLAMPS WILL NOT DISPLAY A WARNING MESSAGE
Vehicles fitted with Adaptive Headlamps will not display a warning message should a failure of the module that controls the Adaptive Headlamps occur.
Update the Instrument Panel Cluster (IPC) software.
AFTER LOW MILEAGE USE ALL OF THE HUB BOLTS ON A WHEEL CAN LOOSEN TO THE POINT WHERE THE WHEEL CAN DETACH FROM THE VEHICLE
After low-mileage use all of the hub bolts on a wheel can loosen to the point where the wheel can detach from the vehicle.
Replace the hub bolts with newly designed hub bolts (with a washer).
A NUMBER OF VEHICLES FITTED WITH ADAPTIVE HEADLAMPS WILL NOT DISPLAY A WARNING MESSAGE
Vehicles fitted with Adaptive Headlamps will not display a warning message should a failure of the module that controls the Adaptive Headlamps occur.
Update the Instrument Panel Cluster (IPC) software.
DUE TO A POSSIBLE FAULTY BONDING THE ROOF WINDOW COVER MAY COMPLETELY COME LOOSE
Due to a possible faulty bonding the roof window cover may completely come loose.
Check the bonding and modify or replace the roof window as necessary.
THE BONDING OF THE RIGHT REAR DOOR WINDOW BAR MIGHT NOT MEET SPECIFICATIONS
The bonding of the right rear door window bar might not meet specifications.
Check the fixation of the window bar on the affected vehicles and replace the side window if necessary
SPECIFIC POINTS ON THE FRONT SEAT BACK FRAMES WERE NOT MANUFACTURED WITH THE MINIMUM RADIUS CRITERIA AND DO NOT COMPLY WITH ECE UNR17
Certain specific points on the seat-back frames were not manufactured with the minimum radius criteria. In this condition these seat-back frames do not comply with ECE UNR17.
Modify the seat back frame
THE ELECTRONIC PARKING PAWL ACTUATOR SYSTEM MAY DISENGAGE THE PARK (P) POSITION
The electronic parking pawl actuator system may disengage the Park (�P�) position.
A software update will be applied to the SCU (Shift By Wire Control Unit) to prevent the issue from occurring.
AN UNCONTROLLED GAS LEAKAGE MAY OCCUR IN LIQUID GAS HOBS MANUFACTURED BY DOMETIC
An uncontrolled gas leakage may occur in liquid gas hobs.
The liquid gas hobs must be checked and replaced if affected.
AN UNCONTROLLED GAS LEAKAGE MAY OCCUR IN LIQUID GAS HOBS MANUFACTURED BY DOMETIC
An uncontrolled gas leakage may occur in liquid gas hobs.
The liquid gas hobs must be checked and replaced if affected.
AN UNCONTROLLED GAS LEAKAGE MAY OCCUR IN LIQUID GAS HOBS MANUFACTURED BY DOMETIC
An uncontrolled gas leakage may occur in liquid gas hobs.
The liquid gas hobs must be checked and replaced if affected.
AN UNCONTROLLED GAS LEAKAGE MAY OCCUR IN LIQUID GAS HOBS MANUFACTURED BY DOMETIC
An uncontrolled gas leakage may occur in liquid gas hobs.
The liquid gas hobs must be checked and replaced if affected.
AN UNCONTROLLED GAS LEAKAGE MAY OCCUR IN LIQUID GAS HOBS MANUFACTURED BY DOMETIC
An uncontrolled gas leakage may occur in liquid gas hobs.
The liquid gas hobs must be checked and replaced if affected.
AN UNCONTROLLED GAS LEAKAGE MAY OCCUR IN LIQUID GAS HOBS MANUFACTURED BY DOMETIC
An uncontrolled gas leakage may occur in liquid gas hobs.
The liquid gas hobs must be checked and replaced if affected.
AN UNCONTROLLED GAS LEAKAGE MAY OCCUR IN LIQUID GAS HOBS MANUFACTURED BY DOMETIC
An uncontrolled gas leakage may occur in liquid gas hobs.
The liquid gas hobs must be checked and replaced if affected.
THE LEFT DOOR OUTSIDE HANDLE MAY NOT HAVE BEEN CORRECTLY ASSEMBLED
The safety clip of the cable that unlatches the Left door when the outer handle is pulled may not been properly positioned.�
Check the safety clip positioning and correct it if necessary.�
THE LEFT DOOR OUTSIDE HANDLE MAY NOT HAVE BEEN CORRECTLY ASSEMBLED
The safety clip of the cable that unlatches the Left door when the outer handle is pulled may not been properly positioned.�
Check the safety clip positioning and correct it if necessary.�
A SOFTWARE IMPLAUSIBILITY ERROR IN THE HV 'BATTERY GATEWAY' CONTROL UNIT MAY CAUSE THE CONTACTORS OF ALL HV BATTERIES TO BE OPENED UNNECESSARILY
A software implausibility error in the HV �battery gateway� control unit may cause the contactors of all HV batteries to be opened unnecessarily.
Check and if required replace the Battery Management (BMS) control unit plus update the software of the HV �battery gateway� control unit.
THE REAR AXLE BOLTS MAY FRACTURE DURING VEHICLE ACCELERATION.
In some of the affected vehicles the rear axle bolts may fracture during vehicle acceleration and may prevent the vehicle from being held stationary if the parking brake is not applied.
A software update will engage the electronic parking brake every time the vehicle is shifted into Park preventing vehicles from rolling.
THE BONDING OF THE CARBON-FIBRE DRIVESHAFT AND THE ENGINE-/TRANSMISSION FLANG MIGHT NOT MEET SPECIFICATIONS
The bonding of the carbon-fibre driveshaft and the engine-/transmission flange might not meet specifications.
Check the carbon-fibre shaft on the affected vehicles and replace it if necessary.
POSSIBLE GEARBOX ELECTRICAL CABLE CONTACT WITH CATALYST THERMAL SHIELD.
Possible gearbox electrical cable contact with Catalyst thermal shield.
Check and ensure the correct positioning of the gearbox wiring harness in relation to the catalytic convertor shield if required replace the wiring harness.
ON CERTAIN VEHICLES THE GLASS OF THE CANOPY REAR WINDOW COULD BREAK
On certain vehicles the glass of the canopy rear window could break.
As a precautionary measure install EPDM blocks (ethylene-propylene-diene rubber) in the rear section of the canopy for vehicles that were additionally equipped with a canopy.
ELECTRICAL CONNECTIONS OF 48 VOLT POWER SYSTEM MIGHT NOT BE PROPERLY TIGHTENED
Possible insufficient tightening on electrical connections of 48 volt power system.
Gain access to the battery system and check tightness of connections to the 48 volt power system. resecure if required.
THE WELD SEAM OF THE HANDLE BAR BRAKES MAY NOT BE TO CORRECT SPECIFICATION
The weld seam of the handlebars may break.
Do not use and return the affected handlebars for reimbursement of costs.
VEHICLES FITTED WITH TAKATA DRIVER AIRBAGS EQUIPPED WHICH MAY NOT FUNCTION AS INTENDED WHEN DEPLOYED
Vehicles fitted with Takata driver airbags equipped which may not function as intended when deployed.
Replace the affected driver airbags on the affected vehicles
ENGINE MANAGEMENT SOFTWARE UPDATE AND RESET REQUIRED TO ENSURE VEHICLE EMISSION COMPLIANCE
Vehicle emission compliance may not be met.
An engine management software update & reset is required to ensure vehicle emission compliance.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →