DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 3476–3500 of 15,570 recalls.
Under certain operating conditions an oil and/or fuel vapour leak in the presence of an ignition source may result in an engine compartment or vehicle fire localized melting or smoke.
Under certain operating conditions an oil and/or fuel vapour leak in the presence of an ignition source may result in an engine compartment or vehicle fire localized melting or smoke.
Modification of the engine undertray and active grill assemblies.
INTERNAL FAULT WITH ONE OF THE BATTERY ARRAYS MAY CAUSE OVERHEATING
A number of Kuga PHEV (Plug-in Hybrid Electric Vehicle) have a High Voltage (HV) battery that may have an internal fault with one of the battery arrays causing overheating
A new HV battery must be installed
THE ECU MODULE CAN BECOME OVERLOADED AND MAY CAUSE THE FUEL PUMP RELAY TO REMAIN LIVE AFTER THE IGNITION SYSTEM IS TURNED OFF.
The ECU module can become overloaded and may cause the fuel pump relay to remain live after the ignition system is turned off.
Fit an electrical diode within the wiring harness and replace the ECU if required.
SOME STEERING SHAFTS WERE ASSEMBLED WITH AN INCORRECT COMPONENT
Some steering shafts were assembled with an incorrect component.
Inspect the steering shaft identification number. Depending on the identification number on the part then the steering shaft may require replacement.
SOME STEERING SHAFTS WERE ASSEMBLED WITH AN INCORRECT COMPONENT
Some steering shafts were assembled with an incorrect component.
Inspect the steering shaft identification number. Depending on the identification number on the part then the steering shaft may require replacement.
SOME STEERING SHAFTS WERE ASSEMBLED WITH AN INCORRECT COMPONENT
Some steering shafts were assembled with an incorrect component.
Inspect the steering shaft identification number. Depending on the identification number on the part then the steering shaft may require replacement.
SOME STEERING SHAFTS WERE ASSEMBLED WITH AN INCORRECT COMPONENT
Some steering shafts were assembled with an incorrect component.
Inspect the steering shaft identification number. Depending on the identification number on the part then the steering shaft may require replacement.
SOME STEERING SHAFTS WERE ASSEMBLED WITH AN INCORRECT COMPONENT
Some steering shafts were assembled with an incorrect component.
Inspect the steering shaft identification number and replace the shaft if necessary.
THE HANDLEBAR STEM BOLT MAY BREAK SUDDENLY
The Handlebar Stem Bolt may break suddenly. This could cause a loss of steering control.
Clean the threads of the steering column and install the new handlebar stem bolt
SOME STEERING SHAFTS WERE ASSEMBLED WITH AN INCORRECT COMPONENT
Some steering shafts were assembled with an incorrect component.
Inspect the steering shaft identification number and replace the shaft if necessary.
SOME STEERING SHAFTS WERE ASSEMBLED WITH AN INCORRECT COMPONENT
Some steering shafts were assembled with an incorrect component.
Inspect the steering shaft identification number and replace the shaft if necessary.
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary.
SOME VEHICLES HAVE BEEN PRODUCED WITHOUT THE REQUIRED EARTHING CONNECTION ON THE PROTECTIVE COVER OF THE HIGH VOLTAGE CONNECTION BOX
Some vehicles have been produced without the required earthing connection on the protective cover of the high voltage connection box.
Check the affected vehicles and add the missing earthing connection wire between the box and the body if necessary.
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO THE CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary
SOME VEHICLES HAVE BEEN PRODUCED WITHOUT THE REQUIRED EARTHING CONNECTION ON THE PROTECTIVE COVER OF THE HIGH VOLTAGE CONNECTION BOX
Some vehicles have been produced without the required earthing connection on the protective cover of the high voltage connection box.
Check the affected vehicles and add the missing earthing connection wire between the box and the body if necessary.
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO THE CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary.
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO THE CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO THE CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary
THE BLIND SPOT ASSIST SYSTEM IS NOT ACTIVATED ON RIGHT-HAND DRIVE VEHICLES
The Blind Spot Assist system is not activated on right-hand drive vehicles.
Add the missing parameter set for the Blind Spot Assist system.
THE HIGH VOLTAGE HARNESS MIGHT NOT BE TO THE CORRECT SPECIFICATION.
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary.
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary.
THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO CORRECT SPECIFICATION
The High Voltage Harness might not be to the correct specification.
Check the harness conformity and replace it if necessary.
THE SOFTWARE OF THE REAR-VIEW CAMERA ON CERTAIN VEHICLES MIGHT NOT MEET SPECIFICATIONS
The software of the rear-view camera on certain vehicles might not meet specifications.
Update the software of the rear-view camera of the affected vehicles.
THE SOFTWARE OF THE REAR-VIEW CAMERA ON CERTAIN VEHICLES MIGHT NOT MEET SPECIFICATIONS
The software of the rear-view camera on certain vehicles might not meet specifications.
Update the software of the rear-view camera of the affected vehicles.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →