DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 2776–2800 of 15,570 recalls.
A potential coolant leak in the Electric Power Control Unit (EPCU) could cause a loss of power whilst driving.
A potential coolant leak in the Electric Power Control Unit (EPCU) could cause a loss of power whilst driving.�
Inspect the EPCU and if a coolant leak is detected replace the unit.�
A potential coolant leak in the Electric Power Control Unit (EPCU) could cause a loss of power whilst driving.
A potential coolant leak in the Electric Power Control Unit (EPCU) could cause a loss of power whilst driving.�
Inspect the EPCU and if a coolant leak is detected replace the unit.�
Mercedes-Benz AG has determined that on certain Sprinter 907 910 model vehicles the software of the instrument cluster control unit does not correspond with the latest series production configuration
On affected vehicles the instrument cluster may fail when starting.� Displays such as the speedometer fuel level indicator lamps and warning messages as well as the warning tones would not function.
Update the instrument cluster software.
On certain Classic Defender Works V8 70th Edition (90 Derivative) vehicles the front anti-roll bar diameter is too small and is the wrong specification for the vehicle application.
On certain Classic Defender Works V8 70th Edition (90 Derivative) vehicles the front anti-roll bar diameter is too small and is the wrong specification for the vehicle application.
Replace the front anti-roll bar with one of the correct specification and associated fixings.
The engine dataset may not comply with OBD (On board diagnostic) regulations.
The engine dataset may not comply with OBD (On board diagnostic) regulations.
Perform a software update of the engine dataset
On affected vehicles due to an incorrect adjusted torque wrench the screw connection of the flange of the catalytic converter was fastened insufficiently.
On affected vehicles due to an incorrect adjusted torque wrench the screw connection of the flange of the catalytic converter was fastened insufficiently.
Rework the screw connection and install a new gasket.
In rare cases the lower section of the outer seat belts may have been trapped behind the lower part of the C-pillar interior trim panels.
In rare cases the lower section of the outer seat belts may have been trapped behind the lower part of the C-pillar interior trim panels.
Check the fitment of the rear seat belts and if applicable release any trapped components.
In rare cases the lower section of the outer seat belts may have been trapped behind the lower part of the C-pillar interior trim panels.
In rare cases the lower section of the outer seat belts may have been trapped behind the lower part of the C-pillar interior trim panels.
Check the fitment of the rear seat belts and if applicable release any trapped components.
On affected vehicles the firewall seal may not satisfy leak tightness requirements. Water may enter into the vehicle causing corrosion on electrical contacts function of the PreSafe system may be impaired and it may not be possible to restart a parked vehicle.
On affected vehicles the firewall seal may not satisfy leak tightness requirements. Water may enter into the vehicle causing corrosion on electrical contacts function of the PreSafe system may be impaired and it may not be possible to restart a parked vehicle.
Install an additional seal for the firewall as a precautionary measure.
Certain vehicles have had a front passenger airbag unit fitted that does not fit the vehicle.
Certain vehicles have had a front passenger airbag unit fitted that does not fit the vehicle.�
Replace the front passenger airbag.
A fuel pipe could develop a leak in the engine compartment which could lead to a risk of a vehicle fire.
A fuel pipe could develop a leak in the engine compartment which could lead to a risk of a vehicle fire.
Check and replace the fuel pipe if necessary.
On affected vehicles the material properties of the upper B-Pillar and the Beltline trim may not meet the specifications.
On affected vehicles the material properties of the upper B-Pillar and the Beltline trim may not meet the specifications.
Replace the B-Pillar and Beltline trim.
Installation of A/C drain hoses
On certain vehicles the air conditioning drain hoses might be incorrectly fitted in the vehicle.�
Check the air conditioning drain hoses and correct their installation if necessary.�
Mercedes-Benz AG has determined that on certain GLE and GLS vehicles (167 platform) the air conditioning drain hoses might be incorrectly fitted in the vehicle. In this case condensation water from the air conditioning might enter the passenger compartment.
On certain vehicles the air conditioning drain hoses might be incorrectly fitted in the vehicle.�
Check the air conditioning drain hoses and correct their installation if necessary.�
Seat belt webbing was damaged during production
Seat belt webbing was damaged during production
Affected seat belts to be replaced
: Some vehicles may experience an abnormal front seat belt pretensioner deployment during a vehicle impact.
Some vehicles may experience an abnormal front seat belt pretensioner deployment during a vehicle impact.
Install front seat belt pretensioner protection caps to both front seat belts.
Certain vehicles may experience a loss of braking assistance and brake performance may be reduced.
Certain vehicles may experience a loss of braking assistance and brake performance may be reduced.
Visually inspect the tandem pump drive belt and mesh filter within the pump assembly and modify where appropriate. If the tandem pump drive belt is defective replace the pump and the drive belt.
Certain transmission front suspension and battery terminal fixings may not be tightened correctly.
Certain transmission front suspension and battery terminal fixings may not be tightened correctly.
Check and tighten all fixings to the correct torque.
: Some vehicles may experience an abnormal front seat belt pretensioner deployment during a vehicle impact.
Some vehicles may experience an abnormal front seat belt pretensioner deployment during a vehicle impact.
Install front seat belt pretensioner protection caps to both front seat belts.
: Some vehicles may experience an abnormal front seat belt pretensioner deployment during a vehicle impact.
Some vehicles may experience an abnormal front seat belt pretensioner deployment during a vehicle impact.
Install front seat belt pretensioner protection caps to both front seat belts.
Poor moulding of the plastic fuel tank by a temporary supplier can lead to a potential fuel leak
Poor moulding of the plastic fuel tank by a temporary supplier can lead to a potential fuel leak
Replace the fuel tank.
Certain vehicles may experience a loss of braking assistance and brake performance may be reduced.
Certain vehicles may experience a loss of braking assistance and brake performance may be reduced.
Visually inspect the tandem pump drive belt and mesh filter within the pump assembly and modify where appropriate. If the tandem pump drive belt is defective replace the pump and the drive belt.
On affected vehicles diesel fuel leaks may possibly occur due to the vehicle being fitted with a fuel return pipe without protective tape. This could cause a potential deformation of the fuel return pipe and in extreme cases could lead to fuel leaks and the risk of fire in the engine compartment.
On affected vehicles diesel fuel leaks may possibly occur due to the vehicle being fitted with a fuel return pipe without protective tape. This could cause a potential deformation of the fuel return pipe and in extreme cases could lead to fuel leaks and the risk of fire in the engine compartment.
The application of protective tape around the fuel return pipe.
On affected vehicles after decelerating/stopping while driving with the i-stop function activated the engine may not restart even when the accelerator pedal is depressed.
On affected vehicles after decelerating/stopping while driving with the i-stop function activated the engine may not restart even when the accelerator pedal is depressed.
Reprogram the DC-AC inverter for MHEV motor ECU.
On affected vehicles the front and rear axles trailing arms and wishbones are susceptible to corrosion and do not meet the required specification for durability.
On affected vehicles the front and rear axles trailing arms and wishbones are susceptible to corrosion and do not meet the required specification for durability.
Replace affected components with new parts.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →