DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 1576–1600 of 15,570 recalls.
Peugeot Traveller/Expert K0 Seat Fixation
On affected vehicles there may be insufficient fixing on the 1st and/or 2nd row of seats that could potentially allow seat movement in the event of a collision
On the affected vehicles seat fixings will be reworked
T.50 Potential porosity in fuel tank fabrication
On certain vehicles there is the Potential for porosity in the fabrication of the fuel tank
Check and replacement of the fuel tank
C0397 Cab lower trim panel adjust. FH/FM/FHE/FME/FMLE (4)
There is a risk that the lower trim panel might get loose and blow away mainly when driving on roadways at high speed.
The assembly of the panels will be inspected to make sure it is correctly done and the lower trim panel will be firmly attached to the cab by screws.
Peugeot 208 P21 Camera Video Module software
On affected vehicles there may be a reduced alert time of 3 seconds instead of the regulatory requirement of 10 seconds to warn the driver that the Advanced Emergency Braking (AEB) is unavailable following an emergency braking event occurring.
On the affected vehicles the camera video module software and calibration will be updated.
Citroen C4 DriverPassenger Airbag (Takata)
On affected vehicles the Driver and Passenger front airbags may not deploy properly in the event of a collision
On affected vehicles the Driver and Passenger front air bags will be replaced
SRT 351 - Malfunction of inhibitor switch on CVT
On affected vehicles the reverse lamp may not illuminate and / or the rear-view monitor may not display an image from the rear-view camera.
Replace the inhibitor switch with an improved part.
The fixings and the relative support plates of the driveshafts to the gearbox may not be properly tight
For certain vehicles the fixings and relative support plates of the driveshafts to the gearbox may have received an incorrect torque setting.
A check of the fixings and relative support plates of the driveshafts.
NV400 (X62) GEN4 Fuel Pipe
On certain vehicles Fuel Pipe characteristics may be out of specification and may have insufficient clearance between fuel pipe and engine harness.
Check of the fuel inlet pipe replacing if necessary and installing a rigid spacer on the pipe.
The fixings and the relative support plates of the driveshafts to the gearbox may not be properly tight
For certain vehicles the fixings and relative support plates of the driveshafts to the gearbox may have received an incorrect torque setting.
A check of the fixings and relative support plates of the driveshafts.
NV300 (X82) Airbag
On affected vehicles the airbag side impact sensors may not have been installed during production. Additionally some vehicles may lack the required wire harnesses for connection of the side impact sensors.
Installation of side impact sensors and where required associated cable kits.
2023-24 Jeep Avenger BEV Advanced Driver Assistance Systems
On affected vehicles equipped with an Advanced Driver Assistance System (ADAS) functionality the AEB/LKA (Active Emergency Brake/Lane Keep Assist) can be deactivated simultaneously. The vehicle does not therefore meet regulatory requirements.
Install updated software.
ARC4 Stop Use & Safety Recall - Wheel attachment with central locking
On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.
Check the correct functioning of the central lock wheel fastening system and replace if necessary.
ARC4 Stop Use & Safety Recall - Wheel attachment with central locking
On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.
Check the correct functioning of the central lock wheel fastening system and replace if necessary.
The starter motor may become contaminated with water after driving the vehicle in abnormally wet weather conditions such as a water flooded area. This may result in an electrical short circuit occurring within the starter motor.
On affected vehicles after driving though abnormally wet weather or flood water the starter motor may become contaminated which could result in a short circuit within the starter motor.
Replace the starter motor.
Replace Passenger Airbag G45
For the affected vehicles the fabric of the passenger airbag may have been damaged during handling for airbag assembly.
Replacement of the passenger airbag.
ARC4 Stop Use & Safety Recall - Wheel attachment with central locking
On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.
Check the correct functioning of the central lock wheel fastening system and replace if necessary.
ARC4 Stop Use & Safety Recall - Wheel attachment with central locking
On affected vehicles the wheel attachments using the central lock may not meet the required specifications. This can lead to damage / breakage and the possibility of wheel detachment.
Check the correct functioning of the central lock wheel fastening system and replace if necessary.
Hydraulic Brake System Unit Replacement
On affected vehicles the brake servomotor was improperly welded. The weld seam might not withstand the stresses caused under high brake pressure leading to a requirement for a higher brake effort increasing the braking distance.
Affected vehicles will have the hydraulic unit of the brake system replaced.
SRPC2409 - Tightness of Transmission Wiring Harness Connector
The manufacturer has determined on affected vehicles the electrical connector of the transmission wiring harness might not have been correctly remedied.
Replace the two-part wiring harness including the connector a with a new one-part variant.
Hydraulic Brake System Unit Replacement
On affected vehicles the brake servomotor was improperly welded. The weld seam might not withstand the stresses caused under high brake pressure leading to a requirement for a higher brake effort increasing the braking distance.
Affected vehicles will have the hydraulic unit of the brake system replaced.
SRPC2409 - Tightness of Transmission Wiring Harness Connector
The manufacturer has determined on affected vehicles the electrical connector of the transmission wiring harness might not have been correctly remedied.
Replace the two-part wiring harness including the connector a with a new one-part variant.
Hydraulic Brake System Unit Replacement
On affected vehicles the brake servomotor was improperly welded. The weld seam might not withstand the stresses caused under high brake pressure leading to a requirement for a higher brake effort increasing the braking distance.
Affected vehicles will have the hydraulic unit of the brake system replaced.
Peugeot 3008 Cradle Bracket
On affected vehicles the cradle bracket is not according to specification. In some cases this could lead to cracking of the bracket and structural integrity loss resulting in loss of vehicle control.
Check the cradle bracket and rework if necessary.
Hydraulic Brake System Unit Replacement
On affected vehicles the brake servomotor was improperly welded. The weld seam might not withstand the stresses caused under high brake pressure leading to a requirement for a higher brake effort increasing the braking distance.
Affected vehicles will have the hydraulic unit of the brake system replaced.
Incorrect Label Tyre Informaiton
On certain vehicles the wheel rim width - engraved on the rear wheel rims (left and right) is not compliant
Current engraving will be removed and replaced with correct new ones.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →