DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 7176–7200 of 15,570 recalls.
CHILD SEAT ISOFIX MOUNTING SUPPORT MAY BE INCORRECT SPECIFICATION
ISOFIX mounting support incorrect specification
Replace ISOFIX mounting support on affected vehicles
THE PASSENGER AIRBAG (PAB) MAY CONTAIN LOOSE FASTNERS DUE TO AN ASSEMBLY PROBLEM AT THE SUPPLIER
The Passenger Airbag (PAB) may contain loose fasteners.
Replace passenger airbag.
DUE TO A FAULT AT THE VEHICLES ASSEMBLY LINE SOME WHEEL BOLTS MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATION
Due to a fault at the vehicles assembly line some wheel bolts may not have been tightened to specification.
On the affected vehicles the wheel bolts will be replaced.
DUE TO A FAULT AT THE VEHICLES ASSEMBLY LINE SOME WHEEL BOLTS MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATION
Due to a fault at the vehicles assembly line some wheel bolts may not have been tightened to specification.
On the affected vehicles the wheel bolts will be replaced.
DUE TO A FAULT AT THE VEHICLES ASSEMBLY LINE SOME WHEEL BOLTS MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATION
Due to a fault at the vehicles assembly line some wheel bolts may not have been tightened to specification.
On the affected vehicles the wheel bolts will be replaced.
FUEL LEAK
Due to the incorrect sealing design of the of the fuel pump fitting onto the fuel tank the O-ring on the fuel pump can become twisted during installation. This may allow fuel to leak.
On affected machines replace the Fuel Pump O-ring.
FUEL LEAK
Due to the incorrect sealing design of the of the fuel pump fitting onto the fuel tank the O-ring on the fuel pump can become twisted during installation. This may allow fuel to leak.
On affected machines replace the Fuel Pump O-ring.
FUEL LEAK
Due to the incorrect sealing design of the of the fuel pump fitting onto the fuel tank the O-ring on the fuel pump can become twisted during installation. This may allow fuel to leak.
On affected machines replace the Fuel Pump O-ring.
MODEL MAY BE AFFECTED BY UNEXPECTED OPENING OF THE HOOD WHILE DRIVING
Unexpected opening of the hood while driving.
Check operation and repair if required.
DURING ASSEMBLY THE CABIN HARNESS CLIP WAS BROKEN RESULTING IN THE HARNESS NOT BEING CORRECTLY SECURED IN FRONT LEFT CHASSIS RAIL / SUSPENSION TURRET AREA
During vehicle assembly the cabin harness was pulled to make the process easier to manage. By pulling the harness a clip was broken or dislodged resulting in the harness not being correctly secured in the front left chassis rail / suspension turret area. In around 10% of affected units the harness makes contact with the transmission mount. The vibration of the transmission can cause the harness to be damaged. If the conductors are exposed this can result in a short circuit and blown fuse. Customer complaints are that the engine does not start and/or the wiper does not work. The engine does not start and/or the windscreen wipers do not work.
The technician will carry out an inspection of the cabin harness and harness clip to determine the required repair: Replace harness clip if it is damaged/missing; Repair the cabin harness in the case of mild abrasion to the harness outer; Replace the cabin harness in the case of exposed conductors.
LOWER CONTROL ARM WELD MAY NOT MEET SEPCIFICATION
Lower control arm weld may not meet specification.
Inspect the front Lower Control Arms and fit new arms if required.
BONDING OF THE REAR BELTLINE TRIM STRIPS MAY NOT BE TO SPECIFICATION
Bonding of the rear beltline trim strips may not correspond to the specifications.
Check the trim strips of the affected vehicles and replace them if necessary.
ENGINE WIRE HARNESS CONNECTED TO HYBRID VEHICLE POWER CONTROL UNIT COULD CONTACT COVER
Due to assembly variation a portion of the engine wire harness could contact the cover.Should the insulation wear and the core wires become exposed there is an increased risk of a vehicle fire.
Inspect the engine wire harness and repair or replace it if necessary.
REAR AXLE BRAKE CALIPER MAY NOT HAVE BEEN MANUFACTURED ACCORDING TO SPECIFICATION
Hydrogen may be embedded in the piston material of rear brake calipers.
Bleed the hydraulic brake system of the rear axle of affected vehicles.
REAR AXLE BRAKE CALIPER MAY NOT HAVE BEEN MANUFACTURED ACCORDING TO SPECIFICATION
Hydrogen may be embedded in the piston material of rear brake calipers.
Bleed the hydraulic brake system of the rear axle of affected vehicles.
ENGINE WIRE HARNESS CONNECTED TO HYBRID VEHICLE POWER CONTROL UNIT COULD CONTACT COVER
Due to assembly variation a portion of the engine wire harness could contact the cover.Should the insulation wear and the core wires become exposed there is an increased risk of a vehicle fire.
Inspect the engine wire harness and repair or replace it if necessary.
VEHICLES MAY BE FITTED WITH AN INCORRECT PURGE VALVE BRACKET
Subject vehicles may be fitted with an incorrect purge valve bracket.
Subject vehicles will be checked. If the incorrect part has been installed � the part needs to be replaced. If there is any evidence of fouling between components � the fuel pipe will also be replaced.
ENGINE WIRE HARNESS CONNECTED TO HYBRID VEHICLE POWER CONTROL UNIT COULD CONTACT COVER
Due to assembly variation a portion of the engine wire harness could contact the cover.Should the insulation wear and the core wires become exposed there is an increased risk of a vehicle fire.
Inspect the engine wire harness and repair or replace it if necessary.
DUE TO IMPROPER PROGRAMMING IN THE ECU POSSIBLE LOSS OF MOTIVE POWER AND THE HYBRID SYSTEM WILL SHUT DOWN
loss of motive power when the accelerator pedal is quickly depressed.
Reprogram the HV control ECU.
PASSENGER AIRBAG INFLATOR MAY NOT OPERATE AS INTENDED
On the subject vehicles the passenger airbag inflators may not operate as intended.
Replacement of passenger airbag Assembly
TAKATA DRIVER AIRBAG INFLATORS MAY NOT OPERATE AS INTENDED
Driver airbag inflators may not operate as intended.
Replacement of Airbag Assembly on affected vehicles.
TAKATA DRIVER AND PASSENGER AIRBAG INFLATORS MAY NOT OPERATE AS INTENDED
Driver and Passenger airbag inflators may not operate as intended.
Replacement of Airbag Assembly.
AUTONOMOUS EMERGENCY BRAKING FEATURE WILL NOT BE AVAILABLE
Autonomous Emergency Braking (AEB) feature will not be available.
On affected vehicles download the latest software to the vehicle.
AUTONOMOUS EMERGENCY BRAKING FEATURE WILL NOT BE AVAILABLE
Autonomous Emergency Braking (AEB) feature will not be available.
On affected vehicles download the latest software to the vehicle.
AUTONOMOUS EMERGENCY BRAKING FEATURE WILL NOT BE AVAILABLE
Autonomous Emergency Braking (AEB) feature will not be available.
On affected vehicles download the latest software to the vehicle.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →