DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 6051–6075 of 15,570 recalls.
THE BOLT IN THE FRONT AXLE DIFFERENTIAL TRANSMISSION MIGHT NOT MEET DUABILITY SPECIFICATIONS
The bolt in the front axle differential transmission might not meet durability specifications.
Replace the electric powertrain of the front axle on the affected vehicles.
POTENTIAL CHAFING ON THE FUEL TUBES
Affected vehicles may have a chafing condition on the fuel pipes.
Check and replace the fuel pipes as necessary add protectors to the pipes
THE FIXATION OF THE REAR DOOR WINDOWS TRIM BAR MAY NOT MEET SPECIFICATION
The fixation of the trim bar at the rear door windows might not meet specification.
Check the fixation of the trim bars on the rear door windows and rework them if necessary.
THE NOX EMISSION LEVELS ARE HIGHER THAN APPROVAL LIMITS DECLARED AND REPEATED INTERRUPTIONS OF THE PARTICULATE FILTER REGENERATION COULD LEAD TO OVERHEATING OF SURROUNDING COMPONENTS
The Nox emission levels are higher than approval limits declared and repeated interruptions of the particulate filter regeneration could lead to overheating of surrounding components.
Engine software update.
REPEATED INTERRUPTIONS OF THE PARTICULATE FILTER REGENERATION COULD LEAD TO OVERHEATING OF SURROUNDING COMPONENTS
Repeated interruptions of the particulate filter regeneration could lead to overheating of surrounding components.
Engine software update
THE DRIVER'S FRONT AIR BAG MAY NOT DEPLOY AS DESIGNED
The driver's front airbag may not deploy as designed.
The driver front airbag gas generator will be replaced.
OUT OF SPECIFICATION STEERING COLUMN
Out of specification steering column
Replace the steering column
THE STRENGTH OF THE REAR CARRIER IS INSUFFICIENT TO ACCOMMODATE ITS MAXIMUM PAYLOAD
The strength of the rear carrier is insufficient to accommodate its maximum payload.
Remove the rear carrier.
THE BRAKE LINE RETAINING CLIP MAY NOT BE FIXED CORRECTLY TO THE TUCKER ON THE DASHBOARD
The brake line (pipe) may not be fixed correctly
Check the clip is fixed correctly and replace damaged brake pipes
CORROSION MAY OCCUR ON THE BRAKES
Abnormal corrosion may occur in the brake calliper the G 310 and C 400 models.
Replace brake callipers in front and rear.
CORROSION MAY OCCUR ON THE BRAKES
Abnormal corrosion may occur in the brake calliper the G 310 and C 400 models.
Replace brake callipers in front and rear.
CORROSION MAY OCCUR ON THE BRAKES
Abnormal corrosion may occur in the brake calliper the G 310 and C 400 models.
Replace brake callipers in front and rear.
CORROSION MAY OCCUR ON THE BRAKES
Abnormal corrosion may occur in the brake calliper the G 310 and C 400 models.
Replace brake callipers in front and rear.
THE ALUMINIUM HOUSING ON THE HIGH PRESSURE SIDE OF THE GAS PRESSURE REGULATOR MAY DEVELOP CRACKS
The Natural Gas regulator may develop a crack
Replace the gas pressure regulator on affected vehicles
THE FUEL LINE MAY BE ROUTED INCORRECTLY
Some 2019-2020 RANGER XP 1000 models were built with the fuel line routed incorrectly
Inspect the fuel line routing and route correctly if needed
THE INTERCOOLER SLEEVE MAY DETACH
The intercooler sleeve may detach.
The retaining metal band must be replaced with a new component
FUEL LEAKAGE MAY OCCUR
Fuel leakages may occur and fumes may form inside the passenger compartment
Fit a new plug and seal to the fuel fitter assembly
STEERING GEAR HOUSING COVER AND POWER PACK ALUMINIUM BOLTS MAY CORRODE
Aluminium screws of the steering gear housing cover and the power pack could corrode and fail
Replace the aluminium screws with steel ones and apply wax to the steering gear.
POSSIBLE LOSS OF POWER WHILST DRIVING
Possible loss of power whilst driving.
Vehicles must have updated software downloaded.
POSSIBLE LOSS OF POWER WHILST DRIVING
Possible loss of power whilst driving.
Vehicles must have updated software downloaded.
REAR SEAT LATCHES AND CENTRE SEAT BELT RETRACTOR BOLTS MAY NOT BE TIGHTENED TO SPECIFICATION
Rear seat latches and centre seat belt retractor bolts may not be tightened to specification.
Affected bolts are to be torqued to specification.
FRONT SEAT BELT END FITTING MAY NOT BE MOUNTED CORRECTLY
Front seat belt may not be mounted correctly
Check the bolt connection on the front seat belt end fitting and repair if necessary.
THE WALL THICKNESS OF THE FUEL TANK MAY NOT BE TO SPECIFICATION
The specified wall thickness of the fuel tank can in some places fall below the threshold.
For all affected vehicles the fuel tank has to be replaced
INCORRECT PERMISSABLE FRONT AXLE FIGURES WERE GIVEN ON THE VIN LABEL
Incorrect permissible front axle figures were given on the VIN label.
Replace VIN label with new
THE WALL THICKNESS OF THE FUEL TANK MAY NOT BE TO SPECIFICATION
The specified wall thickness of the fuel tank can in some places fall below the threshold.
For all affected vehicles the fuel tank has to be replaced
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →