DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 3351–3375 of 15,570 recalls.
The engine control unit wiring harness might come in contact with the engine hood
The engine control unit wiring harness might come in contact with the engine hood.
Check the routing of the engine control unit wiring harness and correct it if necessary.
REAR SEATING SAFETY BELT INSTALLATION NEEDS A MINOR UPGRADE
The rear seating safety belt installation may not perform as intended under high loads.
Depending on vehicle age an additional small bracket to the rear of the seat frame the replacement of some of the seat fixings and relocating of certain components within the seat box may be required.
REAR SEATING SAFETY BELT INSTALLATION NEEDS A MINOR UPGRADE
The rear seating safety belt installation may not perform as intended under high loads.
Depending on vehicle age an additional small bracket to the rear of the seat frame the replacement of some of the seat fixings and relocating of certain components within the seat box may be required.
Loss of drive power due to a firmware issue with the electric motor
The motorcycle may experience a loss of drive power due to a firmware issue with the electric motor.
A firmware update should be applied directly to the motor and a system software update applied.
REAR SEATING SAFETY BELT INSTALLATION NEEDS A MINOR UPGRADE
The rear seating safety belt installation may not perform as intended under high loads.
Depending on vehicle age an additional small bracket to the rear of the seat frame the replacement of some of the seat fixings and relocating of certain components within the seat box may be required.
Motorcycles may experience a failure at the coolant junction resulting in coolant loss during operation
Motorcycles may experience a failure at the coolant junction resulting in coolant loss during operation.
Replace the coolant junction with an improved part.
THE ELECTRONIC PARK BRAKE CONNECTOR MAY DISCONNECT
The electronic park brake connector may disconnect.
Inspect the electronic park brake connector and if necessary fit a retaining clip.
Dismantling or assembly of the additional battery could inadvertently lead to an undetected damage to a wiring harness.
Dismantling or assembly of the additional battery could inadvertently lead to an undetected damage to a wiring harness.
Check the condition of the auxiliary battery positive line and optimize the routing in the affected vehicles.
THE ELECTRONIC PARK BRAKE CONNECTOR MAY DISCONNECT
The electronic park brake connector may disconnect.
Inspect the electronic park brake connector and if necessary fit a retaining clip.
THE ELECTRONIC PARK BRAKE CONNECTOR MAY DISCONNECT
The electronic park brake connector may disconnect.
Inspect the electronic park brake connector and if necessary fit a retaining clip.
THE ELECTRONIC PARK BRAKE CONNECTOR MAY DISCONNECT
The electronic park brake connector may disconnect.
Inspect the electronic park brake connector and if necessary fit a retaining clip.
THE DRIVER'S AIRBAG MAY NOT CORRECTLY DEPLOY IF ACTIVATED
The drivers� airbag may not correctly deploy if activated.
Replace the drivers air bag assembly.
One of the locating bolts on the rear disc brake may not be sufficiently tight or include a locking compound.
One of the locating bolts on the rear disc brake may not be sufficiently tight or include a locking compound.
Remove inspect clean and apply locking compound to all rear disc mounting bolts.
THERE IS A POSSIBILITY THAT THE REAR BRAKE CALIPER WAS INCORRECTLY ASSEMBLED DURING MANUFACTURE
There is a possibility that the rear brake caliper was incorrectly assembled during manufacturing.
Inspect and if necessary replace the rear brake caliper.
INNER AND OUTER SHEET METAL COMPONENTS OF REAR TAILGATE MAY NOT HAVE BEEN JOINED SUFFICIENTLY
The inner and outer sheet metal components of the rear lid may not have been joined together sufficiently well in the manufacturing process.
Replace the rear lid of the affected vehicles.
Partial detachment of profiles and/or scuff plates and/or underbody protection on the S.KO V7 due to defective adhesive bonding.
Partial detachment of profiles and/or scuff plates and/or underbody protection
Inspect trailers and rework affected trim and panels as necessary.
Undetected EGR System leaks may cause thermal activity in the intake manifold
Undetected EGR System leaks may cause thermal activity in the intake manifold.
The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.
Undetected EGR System leaks may cause thermal activity in the intake manifold.
Undetected EGR System leaks may cause thermal activity in the intake manifold.
The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.
Undetected EGR System leaks may cause thermal activity in the intake manifold
Undetected EGR System leaks may cause thermal activity in the intake manifold.
The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.
Undetected EGR System leaks may cause thermal activity in the intake manifold
Undetected EGR System leaks may cause thermal activity in the intake manifold.
The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.
Undetected EGR System leaks may cause thermal activity in the intake manifold
Undetected EGR System leaks may cause thermal activity in the intake manifold.
The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.
Undetected EGR System leaks may cause thermal activity in the intake manifold
Undetected EGR System leaks may cause thermal activity in the intake manifold.
The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.
Undetected EGR System leaks may cause thermal activity in the intake manifold
Undetected EGR System leaks may cause thermal activity in the intake manifold.
The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.
Screw connections of some seats and seatbelts may not have been properly tightened during vehicle production
Screw connections of some seats and seatbelts may not have been properly tightened during vehicle production.
: Inspect and ensure all affected seats and belts are correctly secured and tightened to specification.
Screw connections of some seats and seatbelts may not have been properly tightened during vehicle production
Screw connections of some seats and seatbelts may not have been properly tightened during vehicle production.
: Inspect and ensure all affected seats and belts are correctly secured and tightened to specification.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →