DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 2851–2875 of 15,570 recalls.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
Replace the driver's airbag in affected vehicles.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
Replace the driver's airbag in affected vehicles.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
Replace the driver's airbag in affected vehicles.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
On affected vehicles from a certain production period there is a possibility that the gas generator cover could be damaged when the driver's airbag is activated.
Replace the driver's airbag in affected vehicles.
In the event of a fuel injector failing this will potentially cause a fuel leak.
In the event of a fuel injector failing this will potentially cause a fuel leak.
A drain tube will need to be installed to allow safe passage of the fuel away from hot surfaces in the event of a leak occurring. Also the dealer will perform a PCM software update that will reduce the engine power if a drop in fuel pressure is detected and a warning light will be illuminated to make the user aware.
It has been found that the lower second steering shaft lower bolt may not have been tightened to the correct torque
It has been found that the lower second steering shaft lower bolt may not have been tightened to the correct torque.
Retighten the lower second steering shaft lower bolt to the correct torque value.
On affected motorcycles due to a possible incorrect installation of the fuel solenoid O-Ring the O-Ring may have been pinched and a fuel leak could occur.
On affected motorcycles due to a possible incorrect installation of the fuel solenoid O-Ring the O-Ring may have been pinched and a fuel leak could occur.
Replace the solenoid O-Ring with a counter measure part.
Affected vehicles may have a steering tie rod/track rod end nut that has not been tightened to the correct torque.
Affected vehicles may have a steering tie rod/track rod end nut that has not been tightened to the correct torque.
Replace the steering tie rod/track rod end nut and tighten to the correct torque.
On certain vehicles the left-hand headlamp aim has been set incorrectly.
On certain vehicles the left-hand headlamp aim has been set incorrectly.
Vehicles will have the left-hand headlamp aim adjusted to correct the issue.
On the affected vehicle the tightening torque applied to the steering rack during production may be insufficient.
On the affected vehicle the tightening torque applied to the steering rack during production may be insufficient.
The repair is replacement of the left steering pinion tie rod retainer nut and apply the correct torque.
Affected vehicles may have a steering tie rod/track rod end nut that has not been tightened to the correct torque.
Affected vehicles may have a steering tie rod/track rod end nut that has not been tightened to the correct torque.
Replace the steering tie rod/track rod end nut and tighten to the correct torque.
Affected vehicles may have a steering tie rod/track rod end nut that has not been tightened to the correct torque.
Affected vehicles may have a steering tie rod/track rod end nut that has not been tightened to the correct torque.
Replace the steering tie rod/track rod end nut and tighten to the correct torque.
THE VEHICLE COULD DEVELOP A CRACK AROUND THE EXHAUST MUFFLER FLANGE
It is possible that the exhaust muffler flange weld could crack and in extreme circumstances the exhaust muffler could detach from the vehicle.
Replace the exhaust muffler.
On affected vehicles the centre airbag may not meet specification. In the event of a crash the airbag may not inflate as intended.
On affected vehicles the centre airbag may not meet specification. In the event of a crash the airbag may not inflate as intended.
Replace the centre airbag.
When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
A check of each front seat and rework carried out where necessary.
When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
When riveting the airbag deflector bracket to the seat frame a sharp edge on the rivet could be created. In the event of the seat airbags being deployed it is possible that the airbag material could become torn reducing the effectiveness of occupant protection.
A check of each front seat and rework carried out where necessary.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
Conduct a check of the settings and if necessary perform a reset on the BDC control unit.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
Conduct a check of the settings and if necessary perform a reset on the BDC control unit.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
Conduct a check of the settings and if necessary perform a reset on the BDC control unit.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
On certain vehicles the Body Domain Controller (BDC) control unit may have an incorrect setting applied to it.
Conduct a check of the settings and if necessary perform a reset on the BDC control unit.
There is a risk that the parking brake efficiency is reduced/lost or that the rear brake is blocked/dragging on one or two of the rear wheels.
There is a risk that the parking brake efficiency is reduced/lost or that the rear brake is blocked/dragging on one or two of the rear wheels.
Replace the concerned spring brake cylinder/cylinders.
There is a risk that the parking brake efficiency is reduced/lost or that the rear brake is blocked/dragging on one or two of the rear wheels.
There is a risk that the parking brake efficiency is reduced/lost or that the rear brake is blocked/dragging on one or two of the rear wheels.
Replace the concerned spring brake cylinder/cylinders.
Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated even when the brake pedal is not pressed.
Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated even when the brake pedal is not pressed.
Adjust or replace the brake light switch depending on model affected. Additionally add a spring to the brake light switch.
Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated even when the brake pedal is not pressed.
Potential contamination or component friction in the brake light switch may cause the brake lights to stay illuminated even when the brake pedal is not pressed.
Adjust or replace the brake light switch depending on model affected. Additionally add a spring to the brake light switch.
There is a risk that the parking brake efficiency is reduced/lost or that the rear brake is blocked/dragging on one or two of the rear wheels.
There is a risk that the parking brake efficiency is reduced/lost or that the rear brake is blocked/dragging on one or two of the rear wheels.
Replace the concerned spring brake cylinder/cylinders.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →