DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 2576–2600 of 15,570 recalls.
Trailers were sold without a Certificate of Conformity
Trailers were sold without a Certificate of Conformity.
Trailers will undergo an Individual Vehicle Approval (IVA) test to meet with the requirements.
On affected vehicles the bolted connection to the starter-generator may not have been tightened according to specifications.
On affected vehicles the bolted connection to the starter-generator may not have been tightened according to specifications.
Check and rework the ground connection to the starter generator if required.
Trailers were sold without a Certificate of Conformity
Trailers were sold without a Certificate of Conformity.
Trailers will undergo an Individual Vehicle Approval (IVA) test to meet with the requirements.
On affected vehicles the bolted connection for the starter-generator may not have been tightened onto the body (ground) according to specifications.
On affected vehicles the bolted connection for the starter-generator may not have been tightened onto the body (ground) according to specifications.
Check and rework the ground connection for the starter generator if required.
A potential concern affecting the Vehicle Control Module (VCM) logic of some vehicles has been identified whereby in specific and rare circumstances after switching off the cruise control function there is a possibility of unintended acceleration.
A potential concern affecting the Vehicle Control Module (VCM) logic of some vehicles has been identified whereby in specific and rare circumstances after switching off the cruise control function there is a possibility of unintended acceleration.
The software of the VCM will be updated.
On affected vehicles the child lock function on the rear door locks may be out of specification. The child lock may become disengaged when the inside door handle is operated.
On affected vehicles the child lock function on the rear door locks may be out of specification. The child lock may become disengaged when the inside door handle is operated.
Replace the rear door lock assemblies on both sides with a countermeasure part.
On affected vehicles brake fluid line pipes may have been damaged.
On affected vehicles brake fluid line pipes may have been damaged.�
Check and replace pipes with damaged coating.
On affected vehicles brake fluid line pipes may have been damaged.
On affected vehicles brake fluid line pipes may have been damaged.�
Check and replace pipes with damaged coating.
On affected vehicles brake fluid line pipes may have been damaged.
On affected vehicles brake fluid line pipes may have been damaged.�
Check and replace pipes with damaged coating.
On affected vehicles the wheel and brake bleed bolts might not have been tightened with the required torque.
On affected vehicles the wheel and brake bleed bolts might not have been tightened with the required torque.
Check the wheel and brake bleed bolts and tighten to the correct torque.
Affected vehicles have a fuel tank connecting pipe that may come into contact with the HV Battery protective cover resulting in corrosion causing a hole inside the connecting pipe that may result in a fuel leak.
Affected vehicles have a fuel tank connecting pipe that may come into contact with the HV Battery protective cover resulting in corrosion causing a hole inside the connecting pipe that may result in a fuel leak.
Remove and replace the fuel tank connecting pipe with a modified type.
Affected vehicles have a fuel tank connecting pipe that may come into contact with the HV Battery protective cover resulting in corrosion causing a hole inside the connecting pipe that may result in a fuel leak.
Affected vehicles have a fuel tank connecting pipe that may come into contact with the HV Battery protective cover resulting in corrosion causing a hole inside the connecting pipe that may result in a fuel leak.
Remove and replace the fuel tank connecting pipe with a modified type.
The wheel nuts may come loose.
The wheel nuts may come loose.
The vehicle's wheel nuts must be check-tightened.
There may be a risk of the propeller shaft breaking and damaging adjacent parts
There may be a risk of the propeller shaft breaking and damaging adjacent parts
Inspect and replace the propeller shaft where required.
The wheel nuts may come loose.
The wheel nuts may come loose.
The vehicle's wheel nuts must be check-tightened.
The wheel nuts may come loose.
The wheel nuts may come loose.
The vehicle's wheel nuts must be check-tightened.
Affected vehicles may have been supplied with a Mode 2 (orange) charging cable that was not according to specification (a risk of a wrong safety calibration feature of the temperature sensor of the charging cable pins). In worst-case this could lead to a thermal incident during charging.
Affected vehicles may have been supplied with a Mode 2 (orange) charging cable that was not according to specification (a risk of a wrong safety calibration feature of the temperature sensor of the charging cable pins). In worst-case this could lead to a thermal incident during charging.
Check Mode 2 (orange) charge cable production date and replace if necessary.
On certain vehicles tape used to protect the end of the ground connection wiring harness of the 48V battery may have become trapped beneath the nut securing the wiring harness.
On certain vehicles tape used to protect the end of the ground connection wiring harness of the 48V battery may have become trapped beneath the nut securing the wiring harness.
Inspect the ground connection harness. If required the tape on end of the connector will be reapplied and the nut tightened to the specified torque.
An incorrect bonding of the front hood carbon bezel during an internal cosmetic rework may lead to an adhesion issue that could result in its detachment.
An incorrect bonding of the front hood carbon bezel during an internal cosmetic rework may lead to an adhesion issue that could result in its detachment.
Inspect the vehicles for appropriate bonding of the carbon bezel and if necessary it will be replaced.
On affected vehicles due to a potential error in the press-fitting process during production a leak at the radial shaft seals of the rear axle could occur and allow oil to enter the parking brake drum.
On affected vehicles due to a potential error in the press-fitting process during production�a leak at the radial shaft seals of the rear axle could occur and allow oil to enter the parking brake drum.
Replace the radial shaft sealing rings in the rear axle tube and parking brake shoes if contaminated
Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.
Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.
Check and replace the rear axle crossmember if necessary.
A combination of the instrument cluster software and electrical noise while the vehicle is starting may result in cluster booting errors
A combination of the instrument cluster software and electrical noise while the vehicle is starting may result in cluster booting errors.
The software of the digital instrument cluster of your vehicle must be upgraded.
A combination of the instrument cluster software and electrical noise while the vehicle is starting may result in cluster booting errors
A combination of the instrument cluster software and electrical noise while the vehicle is starting may result in cluster booting errors.
The software of the digital instrument cluster of your vehicle must be upgraded.
Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.
Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.
Check and replace the rear axle crossmember if necessary.
Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.
Affected vehicles may have been fitted with a rear axle crossmember that was not manufactured according to specifications.
Check and replace the rear axle crossmember if necessary.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →