DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 1–25 of 56 recalls.
Seatbelt Torsion Bar
For affected vehicles there is a potential defect in the torsion bar within the front seatbelt system.
Replacement of the affected seat belts.
BCM2 SW – Safety Notice
Affected vehicles may experience a temporary loss of braking functionality after coasting downhill with ‘B’ mode selected or when using One Pedal Drive. This could potentially lead to a collision.
Install modified software via an Over the Air (OTA) update.
SPA1 Cell Modules
On affected vehicles the High Voltage (HV) Battery may have a manufacturing defect which could cause the battery cells to overheat when the HV Battery is fully charged. In a worst-case scenario there is a risk of fire when the vehicle is parked up with a fully charged HV Battery.
Check and replace the HV Battery if necessary and install modified software.
BCM2 – Push Road
The rod connecting the brake pedal to the brake booster may not have been assembled correctly. The final torque might not be according to manufacturing specification due to deviations in the equipment. If the rod does disconnect the mechanical connection between brake pedal and brake booster cannot be guaranteed. In the worst-case scenario if the rod disconnects the brake pedal function cannot be guaranteed
A Volvo retailer will check and if necessary tighten the rod to correct specification.
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
During driving or idle the O-Ring may become twisted or break. Should this occur there could be an oil leak a message for low engine oil level displayed in the vehicle or an unusual smell in the cabin. In a worst case scenario this could cause a thermal event.
Replace O-Ring
There may be a potential software error in the brake control module.
There may be a potential software error in the brake control module.
Update the brake control module software.
There may be a potential software error in the brake control module.
There may be a potential software error in the brake control module.
Update the brake control module software.
A SOFTWARE ERROR MAY PREVENT THE ENGINE CONTROL MODULE FROM STARTING THE ENGINE
The Engine Control Module (ECM) may prevent the combustion engine from starting.�
Download updated software.
POTENTIALLY INSUFFICIENT OR MISSING WELDING CONNECTION IN THE HYDRAULIC UNIT OF THE BRAKE SYSTEM
There may be an insufficient or missing welding connection in the Hydraulic Unit of the Brake System.
Replace the Hydraulic Unit.
POTENTIALLY INSUFFICIENT OR MISSING WELDING CONNECTION IN THE HYDRAULIC UNIT OF THE BRAKE SYSTEM
There may be an insufficient or missing welding connection in the Hydraulic Unit of the Brake System.
Replace the Hydraulic Unit.
PRESSURE IN THE FUEL TANK COULD CAUSE THE FUEL LEVEL SENDER TO INDICATE FUEL IN THE TANK WHEN IT COULD BE EMPTY
Pressure in the fuel tank could cause the fuel level sender to indicate fuel in the tank when it could be empty.
Update software which will allow the electronic fuel tank ventilation valve to release pressure when required.
THERE IS A RISK THAT THE 15AMP FUSE COULD BLOW WHICH WILL PREVENT THE LOW PRESSURE FUEL PUMP FROM OPERATING
There is a risk that the 15amp fuse could blow which will prevent the low pressure fuel pump operating.
Replace the 15A fuse with a 20A fuse which can withstand this peak.
THERE IS A RISK THAT THE 15AMP FUSE COULD BLOW WHICH WILL PREVENT THE LOW PRESSURE FUEL PUMP FROM OPERATING
There is a risk that the 15amp fuse could blow which will prevent the low pressure fuel pump operating.
Replace the 15A fuse with a 20A fuse which can withstand this peak.
VEHICLES MAY HAVE THE SUPPLEMENTARY RESTRAINT SYSTEM CONTROL UNIT INCORRECTLY TIGHTENED TO THE CAR BODY
Vehicles may have the Supplementary Restraint System (SRS) control unit incorrectly tightened to the car body.
Inspect and tighten the SRS control unit.
VEHICLES MAY HAVE THE SUPPLEMENTARY RESTRAINT SYSTEM CONTROL UNIT INCORRECTLY TIGHTENED TO THE CAR BODY
Vehicles may have the Supplementary Restraint System (SRS) control unit incorrectly tightened to the car body.
Inspect and tighten the SRS control unit.
THERE IS A RISK FOR TRAPPED AIR TO BE IN THE COOLING SYSTEM WHICH MAY RESULT IN INSUFFICIENT COOLING OF ENGINE COMPONENTS
There is a risk for trapped air to be in the cooling system which may result in insufficient cooling of engine components.
Add an extra degassing line (Bleeder Hose) between the cooling system radiator and the cooling system expansion tank which will evacuate the trapped air
THERE IS A RISK FOR TRAPPED AIR TO BE IN THE COOLING SYSTEM WHICH MAY RESULT IN INSUFFICIENT COOLING OF ENGINE COMPONENTS
There is a risk for trapped air to be in the cooling system which may result in insufficient cooling of engine components.
Add an extra degassing line (Bleeder Hose) between the cooling system radiator and the cooling system expansion tank which will evacuate the trapped air
THERE IS A RISK FOR TRAPPED AIR TO BE IN THE COOLING SYSTEM
There is a risk for trapped air to be in the cooling system which may result in insufficient cooling of engine components.
Add an extra degassing line (Bleeder Hose) between the cooling system radiator and the cooling system expansion tank which will evacuate the trapped air.
THERE IS A RISK FOR TRAPPED AIR TO BE IN THE COOLING SYSTEM
There is a risk for trapped air to be in the cooling system which may result in insufficient cooling of engine components.
Add an extra degassing line (Bleeder Hose) between the cooling system radiator and the cooling system expansion tank which will evacuate the trapped air.
POTENTIAL BREAKAGE/FATIGUE OF A FLEXIBLE STEEL CABLE SUPPORTING THE FRONT SEATBELT ANCHOR POINT
Potential breakage/fatigue of a flexible steel cable supporting the front seatbelt anchor point.
Replace the seat belt fastener with a new designed seat belt fastening.
POTENTIAL BREAKAGE/FATIGUE OF A FLEXIBLE STEEL CABLE SUPPORTING THE FRONT SEATBELT ANCHOR POINT
Potential breakage/fatigue of a flexible steel cable supporting the front seatbelt anchor point.
Replace the seat belt fastener with a new designed seat belt fastening.
SOFTWARE ISSUE MEANS THAT AUTOMATIC EMERGENCY BRAKE SYSTEM MAY NOT ENGAGE
The Automatic Emergency Brake System a function of the IntelliSafe system may not always engage increasing the risk of a collision
Affected vehicles must have new software downloaded
SOFTWARE ISSUE MEANS THAT AUTOMATIC EMERGENCY BRAKE SYSTEM MAY NOT ENGAGE
The Automatic Emergency Brake System a function of the IntelliSafe system may not always engage increasing the risk of a collision
Affected vehicles must have new software downloaded
THE ENGINE'S PLASTIC INLET MANIFOLD MAY MELT AND DEFORM
The engine�s plastic inlet manifold may melt and deform
Update vehicles with improved soot reducing software cleaning of TMAP and EMAP. Fit additional hoses where necessary.
THE ENGINE'S PLASTIC INLET MANIFOLD MAY MELT AND DEFORM
The engine�s plastic inlet manifold may melt and deform
Update vehicles with improved soot reducing software cleaning of TMAP and EMAP. Fit additional hoses where necessary.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →