DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 201–225 of 366 recalls.
PASSENGER AIRBAG MAY NOT DEPLOY AS INTENDED
There is a possible faulty weld to the gas generator. If the airbag is deployed there is a potential danger to the vehicle occupants by gas generator parts being ejected into the cabin.
Recall the vehicles that are likely to be affected and replace the airbag inflator unit.
PASSENGER AIRBAG MAY NOT DEPLOY AS INTENDED
There is a possible faulty weld to the gas generator. If the airbag is deployed there is a potential danger to the vehicle occupants by gas generator parts being ejected into the cabin.
Recall the vehicles that are likely to be affected and replace the airbag inflator unit.
PASSENGER AIRBAG MAY NOT DEPLOY AS INTENDED
There is a possible faulty weld to the gas generator. If the airbag is deployed there is a potential danger to the vehicle occupants by gas generator parts being ejected into the cabin.
Recall the vehicles that are likely to be affected and replace the airbag inflator unit.
PASSENGER AIRBAG MAY NOT DEPLOY AS INTENDED
A connection between the detonator and generator in the front passenger airbag module may not be correctly welded. Therefore the airbag may not be triggered in the event of a collision.
Recall the vehicles that are likely to be affected and replace the front passenger airbag module.
PASSENGER AIRBAG MAY NOT DEPLOY AS INTENDED
A connection between the detonator and generator in the front passenger airbag module may not be correctly welded. Therefore the airbag may not be triggered in the event of a collision.
Recall the vehicles that are likely to be affected and replace the front passenger airbag module.
TOWING EYE IN THE VEHICLE TOOL KIT MAY DETACH DURING USE
The welding of the towing eye in the vehicle tool kit may not be to specification. As a result the weld on the eye may fail during use causing loss of propulsion and the towrope with the attached eye can potentially cause property damage and personal injury.
Recall the vehicles that are likely to be affected and replace the towing eye in the vehicle tool kit.
TOWING EYE IN THE VEHICLE TOOL KIT MAY DETACH DURING USE
The welding of the towing eye in the vehicle tool kit may not be to specification. As a result the weld on the eye may fail during use causing loss of propulsion and the towrope with the attached eye can potentially cause property damage and personal injury.
Recall the vehicles that are likely to be affected and replace the towing eye in the vehicle tool kit.
FUEL HOSES MAY CRACK AND LEAK
Some fuel hoses were not manufactured to specification and as a result could crack and leak fuel. The fuel could affect the drivability of the subject vehicle and possibly others using the roads.
Recall the vehicles that are likely to be affect and replace 3 fuel hoses.
FUEL HOSES MAY CRACK AND LEAK
Some fuel hoses were not manufactured to specification and as a result could crack and leak fuel. The fuel could affect the drivability of the subject vehicle and possibly others using the roads.
Recall the vehicles that are likely to be affect and replace 3 fuel hoses.
POWER STEERING RETURN HOSE CAN BECOME DAMAGED AND CAUSE HYDRAULIC FLUID TO LEAK AND/OR THE POWER STEERING TO FAIL
A hose clip can damage the power steering return hose for the steering rack. The power steering hose can also contact the wheel housing. If the hose is damaged hydraulic fluid can discharge and the power steering assistance could fail. In unfavourable cases the hydraulic fluid can get in contact with hot vehicle component or on the brake disc. This could create a danger of accident or fire.
Recall the vehicles that are likely to be affected and fit a serrated ring. Fit or remove a spacer as appropriate.
REAR WHEEL BEARING HOUSINGS MAY BE INCORRECTLY MANUFACTURED AND COULD FAIL PREMATURELY
The hardening process for the rear wheel bearing housings may not have been correctly performed. In the worst case this could lead to a fractured housing. Should a fractured housing occur there would be abnormal noises bad tyre wear and a theoretical possibility of wheel loss.
Recall the 420 vehicles that are likely to be affected and replace the right and left rear wheel bearing housings.
REAR WHEEL BEARING HOUSINGS MAY BE INCORRECTLY MANUFACTURED AND COULD FAIL PREMATURELY
The hardening process for the rear wheel bearing housings may not have been correctly performed. In the worst case this could lead to a fractured housing. Should a fractured housing occur there would be abnormal noises bad tyre wear and a theoretical possibility of wheel loss.
Recall the 420 vehicles that are likely to be affected and replace the right and left rear wheel bearing housings.
REAR WHEEL BEARING HOUSINGS MAY BE INCORRECTLY MANUFACTURED AND COULD FAIL PREMATURELY
The hardening process for the rear wheel bearing housings may not have been correctly performed. In the worst case this could lead to a fractured housing. Should a fractured housing occur there would be abnormal noises bad tyre wear and a theoretical possibility of wheel loss.
Recall the 420 vehicles that are likely to be affected and replace the right and left rear wheel bearing housings.
ABS/ESC SYSTEM MAY FAIL
On vehicles with ABS/ESC the earth connection may be interrupted. This may cause failure of the ABS/ESC system
On affected vehicles install new software. Where necessary a new ABS/ESC control unit will be fitted.
ABS/ESC SYSTEM MAY FAIL
On vehicles with ABS/ESC the earth connection may be interrupted. This may cause failure of the ABS/ESC system
On affected vehicles install new software. Where necessary a new ABS/ESC control unit will be fitted.
ABS/ESC SYSTEM MAY FAIL
On vehicles with ABS/ESC the earth connection may be interrupted. This may cause failure of the ABS/ESC system
On affected vehicles install new software. Where necessary a new ABS/ESC control unit will be fitted.
ABS/ESC SYSTEM MAY FAIL
On vehicles with ABS/ESC the earth connection may be interrupted. This may cause failure of the ABS/ESC system
On affected vehicles install new software. Where necessary a new ABS/ESC control unit will be fitted.
ABS/ESC SYSTEM MAY FAIL
On vehicles with ABS/ESC the earth connection may be interrupted. This may cause failure of the ABS/ESC system
On affected vehicles install new software. Where necessary a new ABS/ESC control unit will be fitted.
AIRBAG/BELT TENSIONERS MAY NOT TRIGGER IN EVENT OF AN ACCIDENT
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
On affected vehicles replace air bag assembly and seatbelt pretensioner where necessary.
AIRBAG/BELT TENSIONERS MAY NOT TRIGGER IN EVENT OF AN ACCIDENT
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
On affected vehicles replace air bag assembly and seatbelt pretensioner where necessary.
AIRBAG/BELT TENSIONERS MAY NOT TRIGGER IN EVENT OF AN ACCIDENT
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
On affected vehicles replace air bag assembly and seatbelt pretensioner where necessary.
AIRBAG/BELT TENSIONERS MAY NOT TRIGGER IN EVENT OF AN ACCIDENT
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
On affected vehicles replace air bag assembly and seatbelt pretensioner where necessary.
AIRBAG/BELT TENSIONERS MAY NOT TRIGGER IN EVENT OF AN ACCIDENT
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
On affected vehicles replace air bag assembly and seatbelt pretensioner where necessary.
AIRBAG/BELT TENSIONERS MAY NOT TRIGGER IN EVENT OF AN ACCIDENT
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
On affected vehicles replace air bag assembly and seatbelt pretensioner where necessary.
AIRBAG/BELT TENSIONERS MAY NOT TRIGGER IN EVENT OF AN ACCIDENT
Due to an error in the manufacturing process the air bag and/or seat belt pretensioner may not trigger in the event of a collision
On affected vehicles replace air bag assembly and seatbelt pretensioner where necessary.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →