DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 151–175 of 366 recalls.
TOO LITTLE TORQUE MAY BE PROVIDED BY THE ENGINE AT LOW ENGINE SPEEDS
Too little torque may be provided by the engine at low engine speeds.
On the affected vehicles the software of the engine control unit must be updated.
TOO LITTLE TORQUE MAY BE PROVIDED BY THE ENGINE AT LOW ENGINE SPEEDS
Too little torque may be provided by the engine at low engine speeds.
On the affected vehicles the software of the engine control unit must be updated.
THE HOUSING BOLTS ON THE CAMSHELF ADJUSTER MAY COME LOOSE
The housing bolts on the camshaft adjuster may come loose and break the pulley
On the affected vehicles the camshaft adjuster has to be replaced
POSSIBLE INCORRECT WELDED CONNECTION OF REAR SEAT BENCH
A welded connection of the rear seat bench may not have been correctly performed.
Check the welding of the mounting for right rear head restraint guides and if necessary replace the backrest frame.
WATER MAY GET INTO INTERIOR AND RUN ONTO CONTROL UNITS FOR THE REAR LID
Water may get into the vehicle interior and run onto the control units for the rear lid
The motor lead-through for the electric sliding door is to be sealed to the right side panel.
WATER MAY GET INTO THE VEHICLE INTERIOR AND RUN ONTO THE CONTROL UNITS FOR THE REAR LID
Water may get into the vehicle interior and run onto the control units for the rear lid
The motor lead-through for the electric sliding door is to be sealed to the right side panel.
A WRONG MULTIPLE FUSE WAS INSTALLED IN THE ELECTRONICS BOX
An incorrect multiple fuse was installed in the electronics box.
The incorrect multiple fuse in the electronics box has to be replaced
POSSIBLE CRACKS IN LEFT FRONT SEATS
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
Check and replace the seat frame if a crack is found
TOW BAR WITH A POSSIBLE DEFECTIVE LOCKING MECHANISM MAY HAVE BEEN FITTED
A tow bar with a possible defective locking mechanism in the swivelling module.
The affected tow bar has to be checked and if necessary the swivelling module of the tow bar replaced.
THE JOINT BETWEEN THE SUN ROOF TRIM AND SUN ROOF FRAME IS INCORRCTLY BONDED
A possible faulty bonded joint between sun roof trim panel and sun roof frame.
The sun roof trim panel is replaced on affected vehicles.
THE JOINT BETWEEN THE SUN ROOF TRIM AND SUN ROOF FRAME IS INCORRCTLY BONDED
A possible faulty bonded joint between sun roof trim panel and sun roof frame.
The sun roof trim panel is replaced on affected vehicles.
THE SHOCK ABSORBER FORK ON THE FRONT AXLE MAY NOT HAVE BEEN PRODUCED WITH CORRECT CASTING TEMPERATURE
A casting process error may affect the rigidity of the front shock absorber fork.
Replace the affected shock absorber forks.
THE ADJUSTED HANDBRAKE LEVER TRAVEL FOR PARKING THE VEHICLE CAN INCREASE
Hand brake lever travel increase due to adjuster nut movement.
Re-adjust assembly and fit locking device to nut.
DRIVER AIRBAG GENERATOR HOUSING COULD COME LOOSE
Increased humidity may have got into the propellant of the gas generator for the drivers air bag.
The gas generator of the front airbag on the driver side is replaced.
DRIVER AIRBAG GENERATOR HOUSING COULD COME LOOSE
Increased humidity may have got into the propellant of the gas generator for the drivers air bag.
The gas generator of the front airbag on the driver side is replaced.
DRIVER AIRBAG GENERATOR HOUSING COULD COME LOOSE
Increased humidity may have got into the propellant of the gas generator for the drivers air bag.
The gas generator of the front airbag on the driver side is replaced.
DRIVER AIRBAG GENERATOR HOUSING COULD COME LOOSE
Increased humidity may have got into the propellant of the gas generator for the drivers air bag.
The gas generator of the front airbag on the driver side is replaced.
THE BONDED JOINT BETWEEN THE UPPER AND LOWER SECTION OF THE REAR SPOILER MAY BE FAULTY
The bonding of the upper and lower sections of the rear spoiler may be faulty.
Inspect and repair or replace the spoiler if required.
REAR SEAT BENCH WELDED CONNECTION MAY NOT BE CORRECTLY PERFORMED
The rear back rest head restraint mounting is not correctly welded.
Check and replace rear back rest frame if required.
REAR SEAT BENCH WELDED CONNECTION MAY NOT BE CORRECTLY PERFORMED
The rear back rest head restraint mounting is not correctly welded.
Check and replace rear back rest frame if required.
REAR SEAT BENCH WELDED CONNECTION MAY NOT BE CORRECTLY PERFORMED
The rear back rest head restraint mounting is not correctly welded.
Check and replace rear back rest frame if required.
REAR SEAT BENCH WELDED CONNECTION MAY NOT BE CORRECTLY PERFORMED
The rear back rest head restraint mounting is not correctly welded.
Check and replace rear back rest frame if required.
A SHORT CIRCUIT IN THE LED MODULE OF THE PANORAMA SUN ROOF CAN OCCUR
Possible short circuit in LED lighting module of the panoramic roof.
Modify wiring with integrated fuse adapter cables.
A SHORT CIRCUIT IN THE LED MODULE OF THE PANORAMA SUN ROOF CAN OCCUR
Possible short circuit in LED lighting module of the panoramic roof.
Modify wiring with integrated fuse adapter cables.
THE BELT BUCKLE HOLDER OF REAR RIGHT SEAT MAY NOT MEET THE STRENGTH REQUIREMENTS
The seat belt buckle holder of the right rear seat may not meet specification.
Check and replaces seat belt buckle assembly.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →