DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 251–275 of 694 recalls.
THE REAR BRAKE HOSE MAY BECOME DAMAGED OVER TIME DUE TO MOVEMENT BETWEEN THE HOSE AND HOLDING CLIP
There is a possibility that the rear brake hose may become damaged due to relative movement between the hose and the holding clip.
Check the condition of the left and right rear brake hoses and replace them if necessary.
NON-CONFORMITY OF THE REAR BRAKE CALIPERS
A non-conformity of the rear brake callipers could reduce the efficiency of the parking brake.
Check and if necessary replace the callipers
THE REAR BRAKE HOSES MAY HAVE BEEN DAMAGED DUE TO MOVEMENT BETWEEN THESE HOSES AND A CLIP
The rear brake hoses may have been damaged over time due to inappropriate movement between these hoses and a clip.
Check the condition of the rear left-hand and right-hand brake hoses and replacing them if necessary. A new retaining clip is fitted on all vehicles to prevent this relative movement.
ONE OR MORE FIXATIONS OF THE SEATBELTS LOWER BOLTS MAY NOT BE TIGHTENED CORRECTLY
The tightening and positioning of the seat belt lower bolts may be incorrect.
This campaign consists of checking and if necessary correcting both the position of the bolt and the tightening torque of all of the lower fixings of the seat belts.
ONE OR MORE FIXATIONS OF THE SEATBELTS LOWER BOLTS MAY NOT BE TIGHTENED CORRECTLY
The tightening and positioning of the seat belt lower bolts may be incorrect.
This campaign consists of checking and if necessary correcting both the position of the bolt and the tightening torque of all of the lower fixings of the seat belts.
ONE OR MORE FIXATIONS OF THE SEATBELTS AND ONE GROUND CABLE MAY NOT BE TIGHTENED CORRECTLY
The tightening of the seat belt fixings and of certain earth cables may not conform to specification
Tightening of the seat belt fixings and of certain earth cables.
TIGHTENING OF REAR SUSPENSION FIXINGS MAY NOT BE TO SPECIFICATION
The tightening of some rear suspension fixings may not be correct to specification.
Correcting some tightening torques and replacing some nuts and bolts.
POSSIBLE NON CONFORMITY OF SEALS IN FRONT WHEEL ARCHES COULD LEAD TO WATER INGRESS INTO CERTAIN ELECTRONIC UNITS
Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment.
Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required.
POSSIBLE NON CONFORMITY OF SEALS IN FRONT WHEEL ARCHES COULD LEAD TO WATER INGRESS INTO CERTAIN ELECTRONIC UNITS
Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment.
Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required.
CERTAIN REAR SUSPENSION FIXING BOLTS MAY NOT CONFORM TO SPECIFICATION
Certain rear suspension fixing bolts may not conform to specification which could cause them to break.
Replace the affected bolts
CERTAIN REAR SUSPENSION FIXING BOLTS MAY NOT CONFORM TO SPECIFICATION
Certain rear suspension fixing bolts may not conform to specification which could cause them to break.
Replace the affected bolts
THE ROUTING OF THE REAR BRAKE PIPES MAY NOT CONFORM TO SPECIFICATION
The routing of the rear brake pipes may not be correct and could cause them to fail.
Check and replace affected pipes if necessary
POTENTIAL BLOCKING OF THE UREA INJECTOR
The urea injector may temporarily block
Update the engine management software.
CERTAIN SEALS IN THE FRONT WHEEL ARCHES MAY NOT BE CORRECT TO SPECIFICATION
Certain seals in the front wheel arches may not be correct to specification and may cause water ingress into the passenger compartment
Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required
CERTAIN SEALS IN THE FRONT WHEEL ARCHES MAY NOT BE CORRECT TO SPECIFICATION
Certain seals in the front wheel arches may not be correct to specification and may cause water ingress into the passenger compartment
Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required
THE TRAILER TOW BAR MAY NOT BE TO SPECIFICATION
Some trailer tow ball fixing bolts may be damaged
Replace the two tow ball fixing bolts
THE STEERING COLUMN MAY NOT BE CORRECT TO SPECIFICATION
Steering columns were produced not according to specification.
Replacement of the steering column.
THE PASSENGER OUTER SEAT BELTS MAY NOT BE CORRECT TO SPECIFICATION
The passenger outer seat belts may not be correct to specification
Replace the front outer passenger seat belt.
THE STEERING COLUMN MAY NOT BE CORRECT TO SPECIFICATION
Steering columns were produced not according to specification.
Replacement of the steering column.
THE PASSENGER OUTER SEAT BELTS MAY NOT BE CORRECT TO SPECIFICATION
The passenger outer seat belts may not be correct to specification
Replace the front outer passenger seat belt.
THE TIGHTENING TORQUE OF THE SPARE WHEEL SUPPORT FIXINGS MAY NOT CONFORM TO SPECIFICATION
Possible loss of the spare wheel whilst the vehicle is being driven
Check and correcting the tightening of the support fixings.
THE BRAKE PIPE FIXINGS MAY NOT CONFORM TO SPECIFICATION
The brake pipe fixings may not conform to specification
Checking and repairing these fixings and replacing any damaged pipes as necessary.
THE CALIBRATION OF THE ENGINE MANAGEMENT SOFTWARE COULD CAUSE DAMAGE TO THE DIESEL PARTICLE FILTER
Engine management software issue could cause damage to the diesel particulate filter.
Replace the filter and update the engine management software.
THE CALIBRATION OF THE ENGINE MANAGEMENT SOFTWARE COULD RESULT IN EMISSIONS OF NOx WHICH DO NOT COMPLY WITH REGULATORY LIMITS
Engine management software issue could result in incorrect emission levels.
Update the engine management software.
THE CALIBRATION OF THE ENGINE MANAGEMENT SOFTWARE COULD RESULT IN EMISSIONS OF NOx WHICH DO NOT COMPLY WITH REGULATORY LIMITS
Engine management software issue could result in incorrect emission levels.
Update the engine management software.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →