DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 201–225 of 1,787 recalls.
Specific climatic conditions may over time cause a chemical change in the propellant in the airbag inflator of certain Takata airbags. In the event of an accident in which the airbag is deployed this change could cause the airbag inflator to burst due to increased internal pressure.
Specific climatic conditions may over time cause a chemical change in the propellant in the airbag inflator of certain Takata airbags. In the event of an accident in which the airbag is deployed this change could cause the airbag inflator to burst due to increased internal pressure.
Replace the affected front passenger airbags on the affected vehicles.
THE SPRINGS IN THE LOCKING MECHANISM OF THE SEAT BACKREST OF THE THIRD SEAT ROW MAY NOT HAVE BEEN INSTALLED IN ACCORDANCE WITH THE SPECIFICATIONS
The springs in the locking mechanism of the seat backrest of the third seat row may not have been installed in accordance with the specifications.
Check the springs in the seat backrest of the 3rd seat row on the affected vehicles and replace the seat backrest if necessary.
THE ATTACHMENT FOR THE 12V BATTERY IN THE LUGGAGE COMPARTMENT MAY NOT WITHSTAND THE LOADS IN THE EVENT OF AN ACCIDENT
On certain E-Class vehicles the attachment for the 12V battery in the luggage compartment may not withstand the loads in the event of an accident.
Install an additional fixation of the 12V battery on the affected vehicles.
THE ATTACHMENT FOR THE 12V BATTERY IN THE LUGGAGE COMPARTMENT MAY NOT WITHSTAND THE LOADS IN THE EVENT OF AN ACCIDENT
On certain E-Class vehicles the attachment for the 12V battery in the luggage compartment may not withstand the loads in the event of an accident.
Install an additional fixation of the 12V battery on the affected vehicles.
THE HOLDING FORCE OF THE FUEL FEED LINE MAY NOT CORRESPOND WITH THE SPECIFICATIONS
The holding force of the fuel feed line may not correspond with the specifications.
Check the fuel line on the affected vehicles and replace it if necessary.
A WELD SEAM OF THE SUPPORTING STRUCTURE OF THE TRANSMISSION CONNECTION MAY NOT CORRESPOND WITH THE SPECIFICATIONS
A weld seam of the supporting structure of the transmission connection may not correspond with the specifications.�
Check the transmission connection on the affected vehicles and replace it if necessary.�
SOFTWARE OF THE COMMUNICATION MODULE MAY NOT CORRESPOND WITH THE SPECIFICATIONS
The software of the communication module may not correspond with the specifications.
Update the software of the communication module in the affected vehicles.
SOFTWARE OF THE COMMUNICATION MODULE MAY NOT CORRESPOND WITH THE SPECIFICATIONS
The software of the communication module may not correspond with the specifications.
Update the software of the communication module in the affected vehicles.
SOFTWARE OF THE COMMUNICATION MODULE MAY NOT CORRESPOND WITH THE SPECIFICATIONS
The software of the communication module may not correspond with the specifications.
Update the software of the communication module in the affected vehicles.
SOFTWARE OF THE COMMUNICATION MODULE MAY NOT CORRESPOND WITH THE SPECIFICATIONS
The software of the communication module may not correspond with the specifications.
Update the software of the communication module in the affected vehicles.
SOFTWARE OF THE COMMUNICATION MODULE MAY NOT CORRESPOND WITH THE SPECIFICATIONS
The software of the communication module may not correspond with the specifications.
Update the software of the communication module in the affected vehicles.
The driver airbag may not deploy correctly if activated.
The driver airbag may not deploy correctly if activated.
Replace the drivers air bag.
The fixation of the trim bar at the rear door windows might not meet specifications
The fixation of the trim bar at the rear door windows might not meet specifications.
Check the fixation of the trim bars on the rear door windows and rework them if necessary.
Mechanical damage to the ESP unit
The Electronic stability program (ESP) unit might be mechanically damaged.
Replace the ESP unit on the affected vehicles.
The fixation of the trim bar at the rear door windows might not meet specifications
The fixation of the trim bar at the rear door windows might not meet specifications.
Check the fixation of the trim bars on the rear door windows and rework them if necessary.
Water ingress into the trunk and therefore moisture might enter into the signal acquisition and actuation module
Moisture may ingress into the signal acquisition module.
Retro fit a cover to the signal acquisition module.
THE WIRING HARNESS AT THE B-PILLAR MIGHT BE DAMAGED.
The mounting of an acoustic pad on the B-pillar might not meet specifications.
Remove the acoustic pads and check the seat belt retractors and replace if necessary.
The support of the windowbag in the area of the B-pillar might not meet specifications.
The support of the window airbag in the B-pillar might not meet specifications.
Check the window airbag support and replace it if necessary
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Replace brake booster in vehicles that have not passed XENTRY test and require part replacement.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Replace brake booster in vehicles that have not passed XENTRY test and require part replacement.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Replace brake booster in vehicles that have not passed XENTRY test and require part replacement.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Replace brake booster in vehicles that have not passed XENTRY test and require part replacement.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Replace brake booster in vehicles that have not passed XENTRY test and require part replacement.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Replace brake booster in vehicles that have not passed XENTRY test and require part replacement.
The rear view camera could display frozen images due to a defect in a memory chip
The rear-view camera could display frozen images due to a defect in a memory chip.�
Conduct a software update on the potentially affected vehicles
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →