DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 926–950 of 1,787 recalls.
POSSIBLE COLLISION BETWEEN BRAKE HOSES AND WHEEL ARCH LINER AT THE FRONT AXLE
Contact could occur between brake hoses and the rear segment of the front axle wing panel liner resulting in chafing.
Check the position of the wing liner & modify as per working instructions.
THE WHEEL ARCH LINER ON THE FRONT AXLE COULD TOUCH AND CHAFE THE FLEXIBLE BRAKE HOSE
The wheel arch liner on the front axle could touch and chafe the flexible brake hose.
Check the condition and clearance of the flexible brake hoses replacing them if necessary. Additionally the corresponding wheel arch liner will be modified to provide adequate clearance.
THE + WIRE OF THE GRIPTONE BATTERY CHARGING SOCKET COULD RUB THROUGH
The permanent + wire (30) of the GRIPTONE battery charging socket could rub through due to a sharp edge on a fixing bracket.
The geometry of the fixing bracket will be modified to remove the possibility of the wire rubbing.
THE + WIRE OF THE GRIPTONE BATTERY CHARGING SOCKET COULD RUB THROUGH
The permanent + wire (30) of the GRIPTONE battery charging socket could rub through due to a sharp edge on a fixing bracket.
The geometry of the fixing bracket will be modified to remove the possibility of the wire rubbing.
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MAY NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary
FAULTY PARAMETERIZATION OF EXHAUST GAS AFTERTREATMENT CONTROL UNIT
Affected vehicles have a faulty parameterization of the �exhaust gas aftertreatment� control unit.
Programming update on the engine control unit.
CONNECTING SCREWS ON THE ELECTRIC DRIVE MAY BE MISSING
Connecting screws on the electric drive may be missing in certain eVito vehicles.
Check affected vehicles for missing screws on the drive unit. Should at least one of the screws be missing replace the front drive module.
THE HEAD RESTRAINT PADDING MAY SEPARATE FROM THE FASTENING RODS
The head restraint padding may separate from the fastening rod.
Replace the head restraints on the affected vehicles.
THE HEAD RESTRAINTS OF THE LUXURY BENCH SEATS IN THE REAR MAY HAVE BEEN INSTALLED INCORRECTLY
Bench seats in the rear may have been installed with the head restraint bars of a different bench seat and/or head restraint variant.
Check the head restraints in the rear area in the affected vehicles and replace if necessary.
VEHICLES WITH AN INTEGRATED BACKUP BATTERY HAVE BEEN DELIVERED WITHOUT A SEAT BASE COVER
Vehicles fitted with an auxiliary battery installed under the right front seat may have been delivered without a seat base cover
Retro-fit the seat box cover to the affected vehicles
A WELD SEAM ON THE SEAT HEIGHT ADJUSTMENT MECHANISM MAY NOT BE TO SPECIFICATION
A weld seam on the seat height adjustment mechanism may not have been carried out in accordance with specifications
Replace the seat-frame bases of the front seats in the affected vehicles
THE REAR AXLE STEEL LEAF SPRINGS MAY NOT MEET ALL REQUIREMENTS FOR STRENGTH DURING OPERATION
The rear axle steel leaf springs may not meet all requirements for strength during operation
Check if the rear axle springs on the affected vehicles are a part of an affected production batch and replace them if necessary
CERTAIN THREADED CONNECTIONS ON THE LEFT/RIGHT WHEEL CARRIER ON THE REAR AXLE MAY NOT HAVE BEEN IMPLEMENTED CORRECTLY
Threaded connections on the left/right wheel carrier on the rear axle of certain vehicles may not have been implemented correctly
Check the threaded connections and if necessary replace wheel carriers and/or brake caliper supports on the rear axle
THE SPRING DAMPER SOFTWARE MAY NOT MEET SPECIFICATIONS
The spring damper software might not meet specification affecting level sensors and headlight range.
Replace the spring damper control unit on affected vehicles.
A WELD SEAM ON THE SEAT HEIGHT ADJUSTMENT MECHANISM MAY NOT BE TO SPECIFICATION
A weld seam on the seat height adjustment mechanism may not have been carried out in accordance with specifications
Replace the seat-frame bases of the front seats in the affected vehicles
THE SEALING OF THE ROOF DRIVER AIR CONDITIONING SYSTEM COULD BE INSUFFICIENT
Water can enter in the vehicle interior via the roof mounting point through the connections of the roof module of the air conditioning for the driver's area.
Apply an additional sealing bead as a barrier around the roof mounting point.
THE SEALING OF THE ROOF DRIVER AIR CONDITIONING SYSTEM COULD BE INSUFFICIENT
Water can enter in the vehicle interior via the roof mounting point through the connections of the roof module of the air conditioning for the driver's area.
Apply an additional sealing bead as a barrier around the roof mounting point.
THE SEALING OF THE ROOF DRIVER AIR CONDITIONING SYSTEM COULD BE INSUFFICIENT
Water can enter in the vehicle interior via the roof mounting point through the connections of the roof module of the air conditioning for the driver's area.
Apply an additional sealing bead as a barrier around the roof mounting point.
THE SEALING OF THE ROOF DRIVER AIR CONDITIONING SYSTEM COULD BE INSUFFICIENT
Water can enter in the vehicle interior via the roof mounting point through the connections of the roof module of the air conditioning for the driver's area.
Apply an additional sealing bead as a barrier around the roof mounting point.
THE SEALING OF THE ROOF DRIVER AIR CONDITIONING SYSTEM COULD BE INSUFFICIENT
Water can enter in the vehicle interior via the roof mounting point through the connections of the roof module of the air conditioning for the driver's area.
Apply an additional sealing bead as a barrier around the roof mounting point.
THE SEALING OF THE ROOF DRIVER AIR CONDITIONING SYSTEM COULD BE INSUFFICIENT
Water can enter in the vehicle interior via the roof mounting point through the connections of the roof module of the air conditioning for the driver's area.
Apply an additional sealing bead as a barrier around the roof mounting point.
THE SEALING OF THE ROOF DRIVER AIR CONDITIONING SYSTEM COULD BE INSUFFICIENT
Water can enter in the vehicle interior via the roof mounting point through the connections of the roof module of the air conditioning for the driver's area.
Apply an additional sealing bead as a barrier around the roof mounting point.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →