DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 901–925 of 1,787 recalls.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE SUSPENSION ROLLER PISTON MAY DETACH FROM THE AXLE
It may be possible that the suspension roller piston detaches from the axle.
The screw connection of the roller piston on all axles has to be retightened to the torque of 92Nm.
THE WIRING HARNESS UNDER THE RIGHT SEAT OF THE SECOND SEAT ROW MAY NOT BE ROUTED CORRECTLY
The wiring harness under the right seat of the second seat row might not be routed according to specification.
Check the routing of the wiring harness correct it if necessary and repair any potentially existing damages on the wiring harness.
THE CALIBRATION OF THE OCCUPANT CLASSIFICATION SYSTEM FOR THE PASSENGER SEAT MAY NOT MEET THE SPECIFICATION
The calibration of the occupant classification system for the passenger seat might not meet the specification.
Replace the passenger seat cushion
THE MOUNTING OF THE GAS LINE TO THE GAS GENERATOR OF THE INERTER SYSTEM MAY NOT MEET SPECIFICATIONS
The mounting of an argon gas line to generator of the inerter system might not meet specifications.
Check the mounting of the gas line to the gas generator on the affected vehicles and rework it if necessary.
THE MOUNTING OF THE GAS LINE TO THE GAS GENERATOR OF THE INERTER SYSTEM MAY NOT MEET SPECIFICATIONS
The mounting of an argon gas line to generator of the inerter system might not meet specifications.
Check the mounting of the gas line to the gas generator on the affected vehicles and rework it if necessary.
THE CALIBRATION OF THE OCCUPANT CLASSIFICATION SYSTEM FOR THE PASSENGER SEAT MAY NOT MEET THE SPECIFICATION
The calibration of the occupant classification system for the passenger seat might not meet the specification.
Replace the passenger seat cushion
THE MATERIAL OF TWO CLOSURE PLUGS ON THE ENGINE MAY NOT WITHSTAND THE MAXIMUM LOADS WHILST DRIVING
The material of two closure plugs on the engine might not withstand the maximum loads while driving.
Rework the closure plugs on the engine on the affected vehicles
THE CALIBRATION OF THE OCCUPANT CLASSIFICATION SYSTEM FOR THE PASSENGER SEAT MAY NOT MEET THE SPECIFICATION
The calibration of the occupant classification system for the passenger seat might not meet the specification.
Replace the passenger seat cushion
THE HEAT SHIELD INSTALLED AT THE TURBOCHARGER MAY NOT MEET THE SPECIFICATION
The heat shield installed at the turbocharger may not meet the specification
Replace the heat shield on the affected vehicles
THE SEATBELT ON THE FRONT LEFT SEAT MIGHT NOT HAVE BEEN MOUNTED ACCORDING TO SPECIFICATION.
The seatbelt on the front left seat might not have been mounted according to specification
Check the routing of the seatbelt on the front left seat on the affected vehicles and correct it if necessary. If the webbing is damaged the seatbelt will be replaced.
THE DIMENSION OF THE BRAKE DISCS ON THE FRONT AXLE MAY BE TOO SMALL
The dimension of the brake discs installed on the front axle might be too small.
Replace the brake discs on the affected vehicles.
INCORRECT STARTER WIRING HARNESS AND HOLDER FOR FIXING THE EXHAUST SYSTEM MAY BE INSTALLED
An incorrect starter wiring harness and a holder for fixing the exhaust system could be installed.
Replace the starter wiring harness and the holder for fixing the exhaust on the affected vehicles.
THE THIRD ROW SEAT HEAD RESTRAINTS MAY NOT MEET SPECIFICATION
The third row seat head restraints may not meet specification on affected vehicles.
Replace the head restraints on affected vehicles
INTERNAL WELDING OF THE MAIN CELL CONDUCTORS OF THE HIGH-VOLTAGE BATTERY MIGHT NOT MEET SPECIFICATIONS
Internal welding of the main cell conductors of the high-voltage battery might not meet specification.
Replace the high-voltage battery on the affected vehicles.
THE HEAD RESTRAINT PADDING MAY SEPARATE FROM THE FASTENING RODS
The head restraint padding may separate from the fastening rod.
Replace the head restraints on the affected vehicles.
INCORRECT RESTRAINT BARS AND/OR HEAD RESTRAINTS MAY HAVE BEEN INSTALLED
Bench seats in the rear may have been installed with the head restraint bars of a different bench seat and/or head restraint variant.
Check the head restraints in the rear area in the affected vehicles and replace if necessary.
THE OPERATING MANUAL DOES NOT SPECIFY CERTAIN CONDITIONS UNDER WHICH THE AUTOMATIC PARKING FUNCTION OF THE AUTOMATIC GEARBOX OPERATES
The operating manual does not correctly specify certain conditions under which the automatic parking function (Auto-P) of the automatic gearbox operates.
Add a supplementary booklet with a correct description of the Auto-P function to the operating manual.
THE OPERATING MANUAL DOES NOT SPECIFY CERTAIN CONDITIONS UNDER WHICH THE AUTOMATIC PARKING FUNCTION OF THE AUTOMATIC GEARBOX OPERATES
The operating manual does not correctly specify certain conditions under which the automatic parking function (Auto-P) of the automatic gearbox operates.
Add a supplementary booklet with a correct description of the Auto-P function to the operating manual.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →