DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 51–75 of 128 recalls.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
TAKATA AIRBAG MIGHT NOT DEPLOY AS SPECIFIED
Certain climatic conditions may cause a chemical change to the airbag propellants�over time.�
Replace the driver and�passenger airbags.�
TAKATA AIRBAG MIGHT NOT DEPLOY AS SPECIFIED
Certain climatic conditions may cause a chemical change to the airbag propellants over time.
Replace the driver and passenger airbags.
A NOZZLE INSIDE THE SUCTION JET PUMP IN THE FUEL TANK MIGHT NOT HAVE BEEN INSTALLED OR FIXED INSIDE THE PUMP ACCORDING TO SPECIFICATIONS
A nozzle inside the suction jet pump in the fuel tank might not have been installed or fixed inside the pump according to specifications.
Conduct a check of the fuel system on the affected vehicles and replace the fuel tank including the suction jet pump if necessary.
THE BELT TENSIONER ARM MAY HAVE BEEN MANUFACTURED WITH BORDERLINE TOLERANCE
The belt tensioner arm may have been manufactured with borderline tolerance.
Replace the belt tensioner. Additionally check the v-ribbed belt on the affected vehicles and replace it if necessary.
VEHICLES WITH A PANORAMIC SUNROOFTHE POLYCARBONATE PANEL MAY NOT HAVE BEEN BONDED CORRECTLY DURING A PRIOR SERVICE REPAIR
The polycarbonate panel located between the windshield and the panoramic sunroof may not have been bonded correctly during a prior service repair.
Remove the bonded panel and install a new polycarbonate panel if required.
THE DRIVER'S AIR BAG MAY HAVE A CHEMICAL CHANGE TO ITS PROPELLANT OVER TIME
The driver's airbag may have a chemical change to its propellant over time.
Replace the driver�s airbag.
DIODES ON THE RECTIFIER BRIDGE OF THE ALTERNATOR MIGHT FAIL
Diodes on the rectifier bridge of the alternator might fail.
Update the engine control unit software with an optimised alternator control strategy on the affected vehicles.
THE FIXATION OF THE REAR HEADRESTS MIGHT NOT MEET SPECIFICATIONS
The fixation of the rear headrests might not meet specifications.
Check the guide sleeves on the rear seats of the potentially affected vehicles and replace them if necessary.
THE BOLTING OF THE HIGH VOLTAGE BATTERY TO THE VEHICLE BODY IN THE LUGGAGE COMPARTMENT MIGHT NOT MEET SPECIFICATIONS
The bolting of the high-voltage battery to the vehicle body in the luggage compartment might not meet specifications.
Check the bolting of the high-voltage battery to the vehicle body on the affected vehicles and rework if necessary.
THE BONDING BETWEEN THE GLASS PANEL AND THE SLIDING ROOF FRAME MIGHT NOT MEET SPECIFICATIONS
The bonding between the glass panel and the sliding roof frame might not meet specifications.
Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE CONNECTION OF THE GAS LINES OF THE INERTISATION SYSTEM MIGHT NOT MEET SPECIFICATIONS
The connection of the gas lines of the inertisation system might not meet specifications.
Check and if necessary rework the gas lines of the inertisation system.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE BEHAVIOUR OF THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE EMERGENCY CALL SYSTEM MIGHT NOT MEET SPECIFICATIONS
The behaviour of the emergency call system might not meet specifications.
Update the software of the communication module for the emergency call system.
THE SOFTWARE OF CERTAIN COMMUNICATION MODULES MAY NOT MEET SPECIFICATIONS
The software of certain communication modules may not meet specifications.
Carry out an update to the software of the communication module on affected vehicles.
THE COMMUNICATION MODULE MAY BE DEACTIVATED
The communication module may be deactivated
Carry out a check of the configuration of the communication module on affected vehicles and if necessary activate the communication module.
THE HIGH VOLTAGE WIRING HARNESS SHIELD MAY NOT PERMANENTLY WITHSTAND THE ELECTRICAL LOADS THAT ARE INDUCED UNDER CERTAIN DRIVING PROFILES
The shield for the high-voltage wiring harness may not permanently withstand the electrical loads that are induced under certain driving profiles
Replace the high-voltage wiring harness on the affected vehicles
THE WIRING HARNESS OF THE STEERING CONTROL UNIT MAY NOT HAVE BEEN MANUFACTURED TO SPECIFICATION
The wiring harness of the steering control unit might not have been manufactured according to specification.
Check the wiring harness of the steering control unit on the affected vehicles and replace it if necessary.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →