DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 251–275 of 1,787 recalls.
THE BOLTING OF A 12V POWER SUPPLY LINE MIGHT BE FASTENED WITH AN INSUFFICIENT TORQUE
The bolting of a 12V power supply line might be fastened with an insufficient torque.
Check the bolting of the wiring harness for correct torque and correct it if necessary. Additionally the contact area will be checked for potentially existing damages and if necessary the affected electrical lines and the contact module will be replaced.
THE BONDING OF THE RIGHT REAR DOOR WINDOW BAR MIGHT NOT MEET SPECIFICATIONS
The bonding of the right rear door window bar might not meet specifications.
Check the fixation of the window bar on the affected vehicles and replace the side window if necessary
A SOFTWARE IMPLAUSIBILITY ERROR IN THE HV 'BATTERY GATEWAY' CONTROL UNIT MAY CAUSE THE CONTACTORS OF ALL HV BATTERIES TO BE OPENED UNNECESSARILY
A software implausibility error in the HV �battery gateway� control unit may cause the contactors of all HV batteries to be opened unnecessarily.
Check and if required replace the Battery Management (BMS) control unit plus update the software of the HV �battery gateway� control unit.
THE BONDING OF THE CARBON-FIBRE DRIVESHAFT AND THE ENGINE-/TRANSMISSION FLANG MIGHT NOT MEET SPECIFICATIONS
The bonding of the carbon-fibre driveshaft and the engine-/transmission flange might not meet specifications.
Check the carbon-fibre shaft on the affected vehicles and replace it if necessary.
ON CERTAIN VEHICLES THE GLASS OF THE CANOPY REAR WINDOW COULD BREAK
On certain vehicles the glass of the canopy rear window could break.
As a precautionary measure install EPDM blocks (ethylene-propylene-diene rubber) in the rear section of the canopy for vehicles that were additionally equipped with a canopy.
VEHICLES FITTED WITH TAKATA DRIVER AIRBAGS EQUIPPED WHICH MAY NOT FUNCTION AS INTENDED WHEN DEPLOYED
Vehicles fitted with Takata driver airbags equipped which may not function as intended when deployed.
Replace the affected driver airbags on the affected vehicles
THE ELECTRICAL PLUG CONNECTION OF THE HEADLIGHTS MIGHT NOT BE WATERTIGHT
The electrical plug connection of the headlights might not be watertight.
Check the plug connection and headlights on the affected vehicles and replace it if necessary.
THE LEVEL SENSOR LINKAGE ON THE REAR AXLE MIGHT NOT HAVE BEEN INSTALLED CORRECTLY
The level sensor linkage on the rear axle might not have been installed correctly.
Check the level sensor linkage on the affected vehicles and install it correctly if necessary.
THE BOLTING OF THE 48V GROUND CONNECTION OF THE ELECTRICAL REFRIGERANT COMPRESSOR MIGHT BE FASTENED WITH AN INSUFFICIENT TORQUE
The bolting of the 48V ground connection of the electrical refrigerant compressor might be fastened with an insufficient torque.
Check the bolting of the ground connection on the affected vehicles and correct it if necessary.
THE PASSENGER AIR BAG MAY NOT DEPLOY AS SPECIFIED
The passenger airbag may not deploy as specified.
Replace the passenger airbag.
THE PASSENGER AIR BAG MAY NOT DEPLOY AS SPECIFIED
The passenger airbag may not deploy as specified.
Replace the passenger airbag.
THE PASSENGER AIR BAG MAY NOT DEPLOY AS SPECIFIED
The passenger airbag may not deploy as specified.
Replace the passenger airbag.
THE PASSENGER AIR BAG MAY NOT DEPLOY AS SPECIFIED
The passenger airbag may not deploy as specified.
Replace the passenger airbag.
THE BOLTING CONNECTIONS OF THE DRIVER AND PASSENGER SEAT RAIL AND BODY SHELL MIGHT NOT MEET THE REQUIREMENTS
The bolting connections of the driver and passenger seat rail and the body shell might not meet the requirements.
Rework the bolt connection between the seat rail and the body shell.
VEHICLES FITTED WITH TAKATA DRIVER AIRBAGS EQUIPPED WHICH MAY NOT FUNCTION AS INTENDED WHEN DEPLOYED
Vehicles fitted withTakata driver airbags equipped which may not function as intended when deployed.
Replace the affected driver airbags on the affected vehicles
CERTAIN MODE 2 CHARGING CABLES FOR CHARGING AT A HIOUSEHOLD POWER SOCKET MIGHT NOT MEET SPECIFICATIONS
Certain Mode 2 charging cables for charging at a household power socket might not meet specifications.
Check the Mode 2 charging cable on the affected vehicles and replace it if necessary.
CERTAIN MODE 2 CHARGING CABLES FOR CHARGING AT A HIOUSEHOLD POWER SOCKET MIGHT NOT MEET SPECIFICATIONS
Certain Mode 2 charging cables for charging at a household power socket might not meet specifications.
Check the Mode 2 charging cable on the affected vehicles and replace it if necessary.
THE FUNCTION OF THE BRAKE BOOSTER MIGHT BE AFFECTED DUE TO ADVANCED CORROSION IN THE JOINT AREA OF ITS HOUSING
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Check the brake booster on the affected vehicles and - depending on the result of this inspection - replace it where necessary.
THE FUNCTION OF THE BRAKE BOOSTER MIGHT BE AFFECTED DUE TO ADVANCED CORROSION IN THE JOINT AREA OF ITS HOUSING
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Check the brake booster on the affected vehicles and - depending on the result of this inspection - replace it where necessary.
THE BOLTING OF THE 48V GROUND CONNECTION UNDER THE PASSENGER SEAT MIGHT BE FASTENED WITH AN INSUFFICIENT TORQUE
The bolting of the 48V ground connection under the passenger seat might be fastened with an insufficient torque.
Check the bolting of the ground connection on the affected vehicles and correct it if necessary.
THE FUNCTION OF THE BRAKE BOOSTER MIGHT BE AFFECTED DUE TO ADVANCED CORROSION IN THE JOINT AREA OF ITS HOUSING
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Check the brake booster on the affected vehicles and - depending on the result of this inspection - replace it where necessary.
THE FUNCTION OF THE BRAKE BOOSTER MIGHT BE AFFECTED DUE TO ADVANCED CORROSION IN THE JOINT AREA OF ITS HOUSING
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Check the brake booster on the affected vehicles and - depending on the result of this inspection - replace it where necessary.
THE FUNCTION OF THE BRAKE BOOSTER MIGHT BE AFFECTED DUE TO ADVANCED CORROSION IN THE JOINT AREA OF ITS HOUSING
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Check the brake booster on the affected vehicles and - depending on the result of this inspection - replace it where necessary.
THE FUNCTION OF THE BRAKE BOOSTER MIGHT BE AFFECTED DUE TO ADVANCED CORROSION IN THE JOINT AREA OF ITS HOUSING
The function of the brake booster might be affected due to advanced corrosion in the joint area of its housing.
Check the brake booster on the affected vehicles and - depending on the result of this inspection - replace it where necessary.
INDIVIDUAL BOLTS OR CHAIN LINKS OF THE CAMSHAFT TIMING CHAIN MIGHT WEAR
Individual bolts or chain links of the camshaft timing chain might wear in case of a long term operation under specific driving conditions.
Replace the camshaft timing chain on the affected vehicles
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →