DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 1–25 of 33 recalls.
22-25M Civic and Other Models EPS Gear Box Worm Wheel Swelling Failure 6JP
On affected vehicles due to decrease of the grease amount in the worm wheel gear meshing area of the EPS gear box during use the sliding resistance at the meshing area increases and the torque fluctuation when turning the steering becomes larger resulting in an abnormal noise or a dangerous sticking occurs when turning the steering.
For the Honda Civic (FL4 FE1) CR-V and ZR-V models replace the worm gear pre-load spring with a countermeasure part and add grease. For the Honda Civic Type R (FL5) model replace the Steering Gearbox with a countermeasure part.
22-25M Civic and Other Models EPS Gear Box Worm Wheel Swelling Failure 6JP
On affected vehicles due to decrease of the grease amount in the worm wheel gear meshing area of the EPS gear box during use the sliding resistance at the meshing area increases and the torque fluctuation when turning the steering becomes larger resulting in an abnormal noise or a dangerous sticking occurs when turning the steering.
For the Honda Civic (FL4 FE1) CR-V and ZR-V models replace the worm gear pre-load spring with a countermeasure part and add grease. For the Honda Civic Type R (FL5) model replace the Steering Gearbox with a countermeasure part.
Trailer Hitch Incorrect Part Number Label Attached (Accessory)
Affected vehicles may have been fitted with an incorrectly labelled trailer hitch of the wrong specification which may come into contact with the Integrated Power Unit (IPU) when a rear-end collision occurs and result in a short circuit in the high-voltage power system or a risk of fire. Cracks may also appear on the trailer hitch weld seams when towing excess weight for prolonged periods which could result in a risk of trailer hitch detachment.
Inspect and replace the trailer hitch with the correct part if necessary.
Trailer Hitch Incorrect Part Number Label Attached (Accessory)
Affected vehicles may have been fitted with an incorrectly labelled trailer hitch of the wrong specification which may come into contact with the Integrated Power Unit (IPU) when a rear-end collision occurs and result in a short circuit in the high-voltage power system or a risk of fire. Cracks may also appear on the trailer hitch weld seams when towing excess weight for prolonged periods which could result in a risk of trailer hitch detachment.
Inspect and replace the trailer hitch with the correct part if necessary.
23-25M High Pressure Fuel Pump Solenoid Component Part Breakage - 6YP
On affected vehicles due to manufacturing issues the high pressure fuel pump could leak
On the affected vehicles check for leaks and replace the high pressure pump if necessary
23-25M High Pressure Fuel Pump Solenoid Component Part Breakage - 6YP
On affected vehicles due to manufacturing issues the high pressure fuel pump could leak
On the affected vehicles check for leaks and replace the high pressure pump if necessary
23-24M ZR-V and Others Overspeed Alarm Inoperative
On affected vehicles after cancelling the ACC (Adaptive Cruise Control) the ISA (Intelligent Speed Assistance) will not alert the driver when over speed.
Update Multipurpose Camera Unit with modified software.
23-24M ZR-V and Others Overspeed Alarm Inoperative
On affected vehicles after cancelling the ACC (Adaptive Cruise Control) the ISA (Intelligent Speed Assistance) will not alert the driver when over speed.
Update Multipurpose Camera Unit with modified software.
LIQUID COULD ENTER THE POWER WINDOW MASTER SWITCH AND A SHORT CIRCUIT COULD OCCUR
Power window switch can accumulate water causing overheat and possible fire.
Replace power window master switch with one designed to prevent water accumulation
THE ABSORPTION OF MOISTURE INTO THE DRIVER'S AIR BAG PROPELLANT COULD LEAD TO SLOW DEPLOYMENT OR INFLATOR RUPTURE
The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture.
Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts.
VEHICLES MAY BE EQUIPPED WITH A FUEL PUMP MODULE MANUFACTURED WITH LOW DENSITY IMPELLARS
Affected vehicles may be equipped with a fuel pump module manufactured with low density impellers.
The affected fuel pumps will be replaced.
THE REGULATORY REQUIREMENT FOR EMISSIONS LEVELS ARE NOT MET
The regulatory requirement for emissions levels are not met.
Update the software in the Engine Control Unit to improve the performance of the emissions control system
POSSIBLE AIR BAG INFLATOR RUPTURE
Passenger air bag may not deploy correctly.
The inflator inside the passenger�s airbag module is to be replaced.
POSSIBLE AIR BAG INFLATOR RUPTURE
Driver air bag may not deploy correctly.
The inflator inside the drivers airbag module is to be replaced.
POSSIBLE AIR BAG INFLATOR RUPTURE
Passenger air bag may not deploy correctly.
The inflator inside the passenger�s airbag module is to be replaced.
TAKATA PASSENGER AIRBAG INFLATOR MAY RUPTURE
Passenger airbag inflators may not operate as intended.
Replacement of Airbag Assembly on affected vehicles.
PASSENGER AIRBAG MAY FAIL TO DEPLOY CORRECTLY
The propellant used in the air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. The excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing severe injury to the vehicle occupants.
Recall the vehicles that are likely to be affected and replace the airbag inflator and airbag.
AIRBAG MAY FAIL TO DEPLOY CORRECTLY
Abnormal deployment pressure may lead to rupture of the passenger's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment
On affected vehicles replace the inflator inside the passenger's air bag module.
PASSENGER SIDE AIRBAG MAY FAIL TO DEPLOY CORRECTLY
In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality.
On affected vehicles replace the passenger front air bag module.
DRIVERS AIRBAG INFLATOR MAY RUPTURE IF DEPLOYED
Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment.
On affected vehicles replace the inflator inside the driver's air bag module.
UNINTENDED BRAKING MAY OCCUR
A possible issue with the software in the Collision Mitigation Brake System (CMBS) can under certain rare driving circumstances cause the incorrect or misdetection of objects or obstacles in front of the vehicle that do not actually pose a collision potential. This can cause the inapropriate application of the brake system even if the object is not present or even moving away from the vehicle and does not pose a rish of a collision. However the sudden application of the brakes may lead to a collision with following vehicles and result in possible injury to the vehicle occupants
Recall all affected vehicles to have the CMBS software replaced with a new version.
DRIVERS AIRBAG MAY RUPTURE IF DEPLOYED
Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant.
On affected vehicles replace the drivers airbag module.
PASSENGER SIDE AIRBAG MAY FAIL TO DEPLOY CORRECTLY
Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger�s foot well potentially causing injury to a vehicle occupant.
On affected vehicles replace the inflator inside the front passenger�s airbag module with a new one.
PASSENGER SIDE AIRBAG MAY FAIL TO DEPLOY CORRECTLY
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.
Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module.
WRONG SIZE BRAKE DISCS COULD REDUCE BRAKE PERFORMANCE
It is possible that the brake disc or discs installed to the front of the vehicle may not be the correct size. If left unchecked it could have a detrimental effect on the vehicle as it may cause deterioration in brake performance.
Recall the vehicles that are likely to be affected to check which brake discs are fitted and where necessary fit brake discs of the correct size.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →