DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 51–75 of 238 recalls.
DUE TO A NONCONFORMITY IN PRODUCTION THE SWIVEL PLATES ON WHICH THE TWO FRONT SEATS ARE ANCHORED MUST BE REPLACED
Due to a nonconformity in production the swivel plates on which the two front seats are anchored must be�replaced.
Replace the swivel plates onto which the front seats are anchored.
THE THIRD (HIGH LEVEL) BRAKE LIGHT MAY NOT FUNCTION
The third (high level) brake light may not function.
Update the software to activate the third brake light function.
THE DRIVE SHAFT MAY FAIL DUE TO A NON-CONFORMITY IN THE MATERIAL
The drive shaft joints may fail
Replace the drive shaft or shafts as required
FAULT IN THE AIR BAG CONTROL MODULE SOFTWARE
Due to a fault in the airbag control module software the airbag system may fail to be active without this being indicated on the instrument panel.
Carry out an update to the airbag control module and instrument panel software.
DUE TO A NONCONFORMITY OF THE FUEL RETURN PIPE DIESEL FUEL LEAKS MAY OCCUR
Due to a nonconformity of the fuel return pipe diesel fuel leaks may occur.
Check the conformity of the fuel return pipe and if necessary replace.
DUE TO INCORRECT TYPE APPROVAL DATA PROCESSING THE MANUFACTURER'S PLATE (VIN PLATE) AND REGISTRATION DOCUMENT MUST BE REPLACED
Due to incorrect type-approval data processing the manufacturer's plate (VIN plate) and registration document must be replaced.
Replace the VIN plate and update the registration document as required.
NON CONFORMING STEERING KNUCKLES MAY HAVE BEEN FITTED
Non-conforming steering knuckles may have been fitted.
Check the installed steering knuckles and replace if necessary.
THE START & STOP SYSTEM MAY NOT BE SET CORRECTLY AND THEREFORE MAY NOT COMPLY WITH TYPE APPROVAL REQUIREMENTS
The Start & Stop system may not be set correctly and therefore may not comply with type approval requirements.
The proxi file must be updated to solve the non conformity.
THE SPORT MODE SYSTEM MAY NOT BE SET CORRECTLY AND THEREFORE MAY NOT COMPLY WITH TYPE APPROVAL REQUIREMENTS
The �Sport� mode system may not be set correctly and therefore may not comply with type approval requirements.
The proxi file must be updated to solve the non conformity.
THE REAR RIGHT BRAKE CALLIPER COULD DISPLAY MICRO CRACKS
The rear right brake calliper could display micro-cracks
The production date must be checked and if necessary the brake calliper must be replaced
THE DRIVE AXLE MAY TOUCH THE WIRING
The drive axle may touch the wiring with consequent damage to the wiring.
Check the correct layout of the wiring inspect its condition and reposition or replace as necessary
THE BRAKE VACUUM PUMP MAY NOT FUNCTION CORRECTLY
The brake vacuum pump may not function correctly.
Replace the brake vacuum pump of affected vehicles
THE BRAKE LINE RETAINING CLIP MAY NOT BE FIXED CORRECTLY TO THE TUCKER ON THE DASHBOARD
The brake line (pipe) may not be fixed correctly
Check the clip is fixed correctly and replace damaged brake pipes
THE BALLAST SUPPORT BRACKET WELDED TO THE REAR FLOOR COUD BREAK
The ballast support bracket welded to the rear floor could break
Add two new fixings for each ballast support
POTENTIAL MOVEMENT OF THE BATTERY
Potential movement of the battery and consequent breakage of the battery wires.
A battery spacer must be fitted
THE HANDBRAKE CABLE CONNECTOR ON THE REAR BRAKE CALLIPER MAY BREAK
The handbrake cable connector on the rear brake calliper may break
Check the rear brake calliper conformity and replace if necessary
POTENTIAL RISK OF ACCESS STEP DETACHING FROM VEHICLE BODY
Potential risk of access step detachment from the vehicle body.
Replacement of the access step fasteners.
THE RIGHT SIDE OF DRIVE SHAFT MAY FAIL
Drive shaft may fail.
Replace the right hand drive shaft
FIRST GEAR COULD BE ENGAGED WHILST THE VEHICLE IS IN MOTION AND THE SHIFT LEVER IN THE D POSITION
First gear could be engaged with the vehicle in motion and the shift lever in the D position.
Update the transmission control module software
FUEL LEAKAGE MAY OCCUR FROM THE FUEL TANK
Due to a non-conformity in production fuel leakage may occur from the fuel tank
Replace the fuel tank
FIRST GEAR COULD BE ENGAGED WHILST THE VEHICLE IS IN MOTION AND THE SHIFT LEVER IN THE D POSITION
First gear could be engaged with the vehicle in motion and the shift lever in the D position.
Update the transmission control module software
NON-CONFORMITY IN THE AIR BAG CONTROL MODULE SOFTWARE
Non-conformity in the airbag control module software
Update the airbag control module software
INTERCOOLER SLEEVE MAY BECOME DETACHED
The intercooler sleeve may detach from the throttle body
Replace the current sleeve and respective metal bands with modified parts.
THE HANDBRAKE EFFICIENCY COULD BE LOST DUE TO THE PARKING BRAKE CABLE PRODUCTION PROCESS
The parking brake efficiency could be lost due to a production problem with the cables.
Replacement of the parking brake cables on affected vehicles.
NON-CONFORMITY OF THE HEIGHT ADJUSTMENT MECHANISM OF THE STEERING COLUMN
The steering column height adjustment mechanism could accidentally release.
Replace the steering column mechanism.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →