DVLA recall archive
The archive holds 15,570 DVLA vehicle safety recalls dating back to 1992. Filter by manufacturer, year, or keyword. To check whether a specific vehicle is affected by an outstanding recall, run a live VRM recall check for £1.99.
Showing 51–75 of 291 recalls.
On certain vehicles an incorrect bracket for the side airbag was fitted in the left front seat.
On certain vehicles an incorrect bracket for the side airbag was fitted in the left front seat.
Replace the side airbag and bracket.
In certain conditions and over time moisture may enter the high-voltage battery area of specific vehicles.
In certain conditions and over time moisture may enter the high-voltage battery area of specific vehicles.
The airtightness of the system must be checked and where required the high-voltage battery will be replaced.
On certain vehicles an incorrect bracket for the side airbag was fitted in the left front seat.
On certain vehicles an incorrect bracket for the side airbag was fitted in the left front seat.
Replace the side airbag and bracket.
On affected vehicles it is possible the guide channel for the front passenger's airbag may not have been welded to the dash panel according to specifications.
On affected vehicles it is possible the guide channel for the front passenger's airbag may not have been welded to the dash panel according to specifications.
Check the serial number of the dash panel and replace if required.�
On affected vehicles it is possible the guide channel for the front passenger's airbag may not have been welded to the dash panel according to specifications.
On affected vehicles it is possible the guide channel for the front passenger's airbag may not have been welded to the dash panel according to specifications.
Check the serial number of the dash panel and replace if required.�
On affected vehicles an electrical connector for the power supply for the fuse carrier in the interior of the vehicle may have not been installed correctly.
On affected vehicles an electrical connector for the power supply for the fuse carrier in the interior of the vehicle may have not been installed correctly.
Check the electrical connection and secure if necessary.
On affected vehicles an electrical connector for the power supply for the fuse carrier in the interior of the vehicle may have not been installed correctly.
On affected vehicles an electrical connector for the power supply for the fuse carrier in the interior of the vehicle may have not been installed correctly.
Check the electrical connection and secure if necessary.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the driver side.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the driver side.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the driver side.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the passenger side.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the driver side.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the passenger side.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the driver side.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
If a front airbag is deployed it is possible that the gas generator housing in which the propellant is generated may burst on vehicles manufactured within a limited period.
As a precautionary safety measure it is necessary to replace the airbag unit on the passenger side.
The fuel gauge may not show the drop in fuel level correctly during vehicle operation
The fuel gauge may not show the drop in fuel level correctly during vehicle operation.
The tank level sender must be replaced on the affected vehicles.
The fuel gauge may not show the drop in fuel level correctly during vehicle operation
The fuel gauge may not show the drop in fuel level correctly during vehicle operation.
The tank level sender must be replaced on the affected vehicles.
There may have been a discrepancy in the manufacturing process for the air spring strut
There may have been a discrepancy in the manufacturing process for the front left air spring strut.
The affected air spring strut will need to be checked and if necessary replaced.
Certain vehicles may have been fitted with a rear window which does not conform to the manufacturer s quality requirements.
Certain vehicles may have been fitted with a rear window which does not conform to the manufacturer�s quality requirements.
Check the manufacturing date of the vehicle�s rear window and if it is affected replace the window.
RESTRAINING CAPACITY OF THE BELT SYSTEM FOR THE FRONT SEATS MAY BE LOWER THAN INTENDED IN THE EVENT OF AN ACCIDENT
The restraining capability of the belt system for the front seats may be lower than intended in the event of an accident.�
As a precautionary safety measure it is necessary to replace both front seat belts. Advice is given�against transporting children on the front passenger seat until the seat belts have been replaced.�
The airbag gas generator on the passenger side of an affected vehicle could burst in the event of an accident in which the airbag is triggered.
The airbag gas generator on the passenger side of an affected vehicle could burst in the event of an accident in which the airbag is triggered.
Replace the front passenger airbag unit.
INNER AND OUTER SHEET METAL COMPONENTS OF REAR TAILGATE MAY NOT HAVE BEEN JOINED SUFFICIENTLY
The inner and outer sheet metal components of the rear lid may not have been joined together sufficiently well in the manufacturing process.
Replace the rear lid of the affected vehicles.
ENGINE CONTROL UNITS MIGHT BE FITTED WITH SEMICONDUCTOR COMPONENTS THAT DO NOT MEET SPECIFICATIONS
On a small number of vehicles manufactured within a specific period it is possible that the engine control units were fitted with semiconductor components which do not meet the specifications.
The engine control unit must be replaced on the affected vehicles.
ENGINE CONTROL UNITS MIGHT BE FITTED WITH SEMICONDUCTOR COMPONENTS THAT DO NOT MEET SPECIFICATIONS
On a small number of vehicles manufactured within a specific period it is possible that the engine control units were fitted with semiconductor components which do not meet the specifications.
The engine control unit must be replaced on the affected vehicles.
ENGINE CONTROL UNITS MIGHT BE FITTED WITH SEMICONDUCTOR COMPONENTS THAT DO NOT MEET SPECIFICATIONS
On a small number of vehicles manufactured within a specific period it is possible that the engine control units were fitted with semiconductor components which do not meet the specifications.
The engine control unit must be replaced on the affected vehicles.
The DVLA archive lists recalls by make and model. Run a live VRM check to see whether your vehicle has an outstanding recall right now.
Run a recall check for £1.99 →